Brake, Handle And Wheel - GE Brivo OEC 715 Service Manual

Mobile c-arm x-ray product
Hide thumbs Also See for Brivo OEC 715:
Table of Contents

Advertisement

2. Remove the screws of the down side
cover and remove the down side cover.
3. When removing the downside cover
below the brake pedal, remove the
screws of brake pedal and remove the
brake pedal first.

7.3.6. Brake, Handle and Wheel

Lateral Rotation Brake and Orbital Movement Brake (5333087)
Lateral Rotation Brake and Orbital Movement brake have the same replacement procedure:
1.
Make sure the brake is set.
2.
Loosen the screw that secures the handle to C-Arm.
3.
Remove the handle.
4.
Install the new handle and fasten the screw. Pay attention to keep
the original assembling direction.
5.
Release the brake. Move the C-Arm and verify that C-Arm can be
locked by placing the brake in lock position.
Wig-Wag Brake (5075906)
1.
Remove the securing screw.
2.
Release the wig-wag brake.
Replacement
7-23

Advertisement

Table of Contents
loading

This manual is also suitable for:

Brivo oec 785Brivo oec 865

Table of Contents