Panasonic KX-HNK101C Operating Instructions Manual page 11

2
Place the mounting bracket against the wall and determine where the
mounting bracket will be installed. Mark the screw openings on the wall.
R Refer to the information below. The dotted lines indicate where the edges of
3
Drill pilot holes where you marked the screw openings in the previous step.
R The screw openings must be 60 mm (2 11/32 inches) apart.
For assistance, visit www.panasonic.ca/english/support
HNK101C_(en_en)_0804_ver.030.pdf
the keypad will be in relation to the mounting bracket.
C
D
16 mm (5/8 inches)
59 mm (2 5/16 inches)
19 mm (3/4 inches)
Screw openings
60 mm (2 11/32 inches) apart
11
A
C
B
Setup
11
2015/08/04 21:00:14