Panasonic KX-HNK101C Operating Instructions Manual page 13

3
Insert the anchor into the hole so that it is flush with the wall surface.
4
Line up the holes on the mounting bracket with the anchors, then insert and
tighten each screw.
R Use the supplied screws (
R Place the bracket with the "UP" mark facing upwards.
Installing the keypad to the mounting bracket
Attach the keypad to the bracket.
R Insert the grooves on the keypad to the 4 tabs on the bracket, and then push
down the keypad.
For assistance, visit www.panasonic.ca/english/support
HNK101C_(en_en)_0804_ver.030.pdf
).
2
2
2
13
Setup
13
2015/08/04 21:00:14