Read this first! (continued)
Furthermore, each dimension to indicate the hazard area (Hz) for a combination with a projection
lens that has a hazard distance exceeding 1 m (39-3/8") is as follows.
Projector model
PT-REQ12
PT-REQ10 / PT-REQ80
*1
HD: Hazard distance
*2
The values of D1 to D4 will change in accordance with the lens shift amount. Each value in the table is the
maximum value.
Note
z The values in the table are based on IEC/EN 62471-5:2015.
z The projectors compatible with each projection lens may be added or changed without notice. For the latest
information, refer to the following website.
https://panasonic.net/cns/projector/
Attention
z If the light projected from the projector directly enters the eyes while you are inside the hazard zone, the
retinas may be damaged. Do not enter the hazard zone during use. Alternatively, install the projector in a
location where the projected light will not directly enter the eyes.
Projector lens
HD
*1
model
ET-C1T700
2.4
ET-C1T700
1.7
D1
D2
*2
*2
0.481
0.481
0.347
0.347
(Unit: m)
D3
D4
*2
*2
0.553
0.553
0.399
0.399
ENGLISH-5