Variable Speed Cordless Rotary Hammer Operating Instructions Model No: EY6813 IMPORTANT This manual contains safety information. Read manual completely before first using this product and save this manual for future use.
1) Keep your work area clean and well lit. Cluttered benches and dark areas invite accidents. 2) Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Power tools create sparks which may ignite the dust or fumes.
13) Do not force tool. Use the correct tool for your application. The correct tool will do the job better and safer at the rate for which it is designed. 14) Do not use tool if switch does not turn it on or off. A tool that cannot be controlled with the switch is dangerous and must be repaired.
Page 4
8) During charging, the charger may become slightly warm. This is normal. Do not charge the bat- tery for a long period. Symbol meaning Direct Current no load speed revolutions or reciproca- …/min tion per minutes Forward Rotation Reverse Rotation Rotation with Hammering Rotation only WARNING;...
Page 5
7) An extension cord should not be used unless absolutely necessary. Use of improper extension cord could result in a risk of fire and electric shock. If extension cord must be used, make sure: a. that pins on plug of extension cord are the same number, size and shape as those of plug on charger.
Operation Chuck Note: Grease for bit Grease the oval indentation on the bit with the supplied grease at least once a month. 1. To mount the bit 1-1. Insert a bit into the mounting hole, and turn it slightly to locate an en- gaged position.
Support handle Place the support handle at your favorite position and tighten the han- dle securely. Loosen Tighten Depth gauge Loosen the support handle and adjust the depth gauge at your favorite depth. After adjusting, tighten the support handle and fix depth gauge. Depth gauge Depth of drilling Battery pack...
Page 9
3. During charging, the charging lamp will light up. When the charge is completed, an internal electronic switch will auto- matically be triggered to prevent overcharging. Charging will not occur if the bat- tery pack is warm (for example, immediately after heavy-duty operation).
Grease Dust Collection Cup (EY9X004) * Drill bits of which diameter is 20mm above cannot be installed. * Do not use the tool for cutting other than concrete, mortar and other ceramic materials. If used for cutting metal materials, the dust collection cup may be damaged by the metal chip heat.
BATTERY RECYCLING ATTENTION: A nickel metal hydride battery that is recyclable powers the product you have purchased. Please call 1-800-8-BATTERY for information on how to recycle this battery. .Specifications Main Unit (EY6813) Maximum Drilling Diameter Motor Voltage Speed At No Load (RPM) Blows Rate Per Minute (BPM) Weight (with battery pack) Dimensions (L×W×H)
Page 12
30-DAY QUALITY SATISFACTION GUARANTEE: If you are dissatisfied with any Panasonic Cordless Power Tool for any reason, simply return it to the place of purchase with a dated proof of purchase, in the original packaging, with all accessories, parts and instructions, within 30 days of the date of purchase, for a full refund, or call Panasonic at 201-392-6655.