Maintenance; Optional Attach- Ment - Panasonic EY-6813 Operating Instructions Manual

Grease
Dust Collection Cup
(EY9X004)
* Drill bits of which diameter is 20mm
above cannot be installed.
* Do not use the tool for cutting other
than concrete, mortar and other
ceramic materials. If used for cutting
metal materials, the dust collection
cup may be damaged by the metal
chip heat.
1. Install a dril bit.
2. Pass the drill bit through A and fix
the cup at B by matching with the
shape of the support handle.
Operation
Keep the dust collection cup in close
contact with the wall surface during
operation.
Removal
Hold the base of the dust collection
cup for removal.
Please remove after thoroughly get-
ting rid of the dust in the dust collec-
tion cup.
A B
Base
Storage
Do not store the dust collection cup
in a compressed position. If kept in a
compressed position, it may be impos-
sible to return to the original shape.

. Maintenance

Use only a dry, soft cloth for wiping
the unit. Do not use a damp cloth,
thinner, benzine, or other volatile sol-
vents for cleaning.
. Optional Attach-
ment
Can be used in:
Hammer-
Optional
ing mode
attachment
Drill chuck
EY9HX400E
No
Hammer chuck
EY9HX401E
Yes
Chiseling
attachment
EY9HX402E
Yes
- 10 -
Drillring
mode
dia.1.5mm 13mm (1/16"
1/2")
Yes Wood drill
Metal drill
Don't in hammering mode.
dia.2.5mm 13mm (3/32"
1/2")
Masonry drill bit with
straight shank
Yes
(for bricks, mortar, cinder
block, Aired Light Concrete
drilling only)
Wood drill
Metalwork drill
Light weight chiseling.
Peeling off tiles
No
Making ditch for plumbing
Basement trimming