Main Window - Panasonic WJ-ND300 Network Setup Manual

Main window

Tree display
area
Tree display area
Icons of the detected recorders and cameras will be displayed and their IP addresses and MAC addresses will be
displayed. (When failed to detect the camera, its MAC address will not be displayed.) Refer to the next page for fur-
ther information about the icons.
Network settings area
The network settings of the recorder/camera selected in the tree display area will be displayed.
[Delete] button: Click this button to delete the icon of the selected recorder/camera.
[Set] button: Click this button to determine the edited settings.
[Clear] button: Click this button to cancel the edited settings and return to the previous settings. The settings will
return to the previous settings only when the [Set] button is not clicked yet.
[CAM IP Auto Addressing] button*: Click this button to register the edited settings in the recorder. IP addresses
will automatically be assigned to the cameras connected to the recorder.
[Manual Registration] button*: Click this button to register the edited settings to the recorder/camera.
* The [CAM IP Auto Addressing] button and the [Manual Registration] button will be displayed only when the WJ-
ND300 is selected in the tree display area.
[Search] button: Click this button to search the connected recorder and the cameras connected to the recorder.
The search result will be displayed in the tree area.
[Exit] button: Click this button to exit this software.
Network settings
area
7