Icons In The Tree Display Area - Panasonic WJ-ND300 Network Setup Manual

Icons in the tree display area

Type
Recorder
(Camera in normal
status)
(Not applicable)
Camera
(Incorrect settings)
(Settings changed)
8
Icon (Name)
Indicates the network disk recorder WJ-ND300. (Normal display)
(Recorder)
This icon will be displayed when number of the detected cameras that are
connected to the recorder is 33 or more.
(Recorder)
Indicates a camera whose network information is not registered in the
recorder.
It is necessary to configure the network settings and register them in the
(New)
recorder.
Indicates a camera whose network settings are edited with this software.
To apply the edited settings to the recorder/camera, it is necessary to
register this camera again.
(Edited)
Indicates that the network information of this camera is conformed to the
information registered in the recorder and the camera. (Camera in normal
status)
Indicates that this camera is not applicable with this software to configure
the network settings even though the network information of this camera
is registered in the recorder. (Including cameras of other manufacturers)
Network setting configuration is unavailable with this software.
Indicates the camera whose host name is registered in the recorder,
instead of IP address.
Network setting configuration is unavailable with this software. Moving
(Host name)
and copying the icon of this camera is also unavailable.
Indicates a camera not detected even though its network information is
registered in the recorder.
For enhancing security, some cameras may not respond (not be detect-
(Not detected)
ed) even though whose status is normal.
Indicates that the network information of this camera is not conformed to
the information registered in the recorder and the camera (IP address,
etc.) even though the camera is normally detected. This icon will be dis-
played when there is no available IP address for this camera or when
failed to automatically assign an IP address to this camera.
Indicates the 33rd detected camera or later.
The settings for this camera will not be applied since the recorder can
register up to 32 cameras.
(33rd or later)
Indicates that the camera number of this camera has been changed since
this camera is deleted or moved.
It is necessary to register this camera in the recorder again. When this
camera is registered in the recorder again, it is necessary to configure the
settings since the settings such as the recording rate will return to the
default settings.
Description