Husqvarna BMC 335 Operator's Manual page 32

2. Push the inner ends of the drive system pedals to
engage the drive system.
To move the product manually with the
motor off
WARNING:
are stationary before you move the product.
WARNING:
steel toe-cap and non-slip sole.
WARNING:
up and down ramps manually with the drive
system disengaged. Only move the product
manually on level ground.
1. Disengage the drive system. Refer to
and engage the drive system on page 31 .
2. Push the product by the handles.
3. Engage the drive system. Refer to
and engage the drive system on page 31 . With the
motor off, this has the function of a parking brake
and prevents accidental movement of the product.
To move the product up and down a
ramp
WARNING:
move the product up and down ramps. The
product is heavy and there is a risk of injury
if the product falls or moves too quickly.
WARNING:
slope, always use a winch. Do not walk or
stay below or near the product.
32
Wait until all moving parts
Use protective boots with
Do not move the product
To disengage
To disengage
Be very careful when you
For ramps with a steep
• To move the product down a ramp, operate the
product forward slowly.
• To move the product up a ramp, operate the product
rearward slowly.
• Do not turn the product to the left or to the right more
than 45° on a ramp.
To lift the product
WARNING:
equipment has the correct specification to
lift the product safely. The type plate on the
product shows the product weight.
WARNING:
product to prevent unwanted movement.
WARNING:
or near a lifted product. Keep bystanders
away from the work area.
WARNING:
product. Make sure that the lifting eye is
correctly installed and not damaged.
1. Attach the lifting equipment at the lifting eye.
2. Lift the product safely.
To attach the product to a
transportation vehicle
1. Make sure that the drive wheels are engaged. Refer
To disengage and engage the drive system on
to
page 31 .
2. Attach tie-down straps in the lifting eye and the holes
for tie-down straps. Refer to
page 3 for information about where the holes for
tie-down straps are on your product.
3. Attach and tighten the tie-down straps to the
transportation vehicle.
Make sure that the lifting
Safely attach the lifted
Do not walk or stay below
Do not lift a damaged
Product overview on
1816 - 002 - 22.03.2023