Inner Lid - Sharp HEALSIO KN-H24XA Operation Manual

CARE AND CLEANING

Inner lid

Removing the unit
❶
Remove the stirring unit (see page en-19)
Then push the lever outwards, then the inner
lid will open.
❷
Pull diagonally to free the inner lid.
Clean after every use.
●
Wash with mild soap or detergent solution using a soft sponge.
●
Gasket
Rinse and dry thoroughly.
Do not remove the gaskets (the rubber-like part)
●
Lever
Remove any water
from inside the gasket
en-17
continued
Cleaning tips
Refer to Cleaning tips of the inner pot if you
encounter difficult to remove dirt.
See page en-16.
If you accidentally removed the
gasket (the rubber-like part)
Make sure that the "FRONT" on the
●
inner lid and the "FRONT" on the gasket
are facing the same way.
(Attach the gasket by folding it, placing it
inside the hole and then letting it open)
A wrong installation may cause the
control panel to fog up. Also it may cause
the Stirrer unit becomes hard to rotate
and the parts break. (The fog on the
control panel will be gone away after a
while.)
Lightly open
the gasket to
wash it.
Back