Philips 9890 000 0268 Series Service Manual page 10

Replacement Kit Rotor Control HS
Check that the start-up and brake function of the tube(s) work properly.
•
In case rotation prolongation is programmed: Once started with PREP, the anode keeps rotating for 30
seconds. After the last let go of the PREP position as long as no exposure has been switched. The
anode finally stops if an exposure has been switched or after 30 seconds or if any of the desk buttons
has been activated.
4.1.3. Documentation changes
Exchange drawings Z1-13.2 and 5Z-2 in the service manual OPTIMUS RAD/RF.
•
File the service disk in the generator book "Service Manual"
•
4.1.4. Return procedure
Due to the fact that no upgrade (or repair) of a new unit is possible, this kit is not declared as "EU"
(exchangeable unit).
The old RoCol unit and cables are to be disposed of in a safe way in accordance with local safety and
environmental regulations.
Rk RoCo HS Optimus (04.0)
© 2004 Philips Medical Systems
ALL RIGHTS RESERVED
9