What You Need; The 3D Glasses - Philips 65PFG6659 User Manual

12
3D
12.1

What you need

This is an Active 3D TV. On this TV, you can watch 3D
programs and movies in full High Definition resolution
with Active 3D.
To watch 3D you need to :
• Tune to a TV channel that broadcasts programs in 3D
• Rent a movie in 3D from an online video store with Smart TV
• Watch a movie in 3D from a 3D Blu-ray Disc, a USB device,
or computer
Also, to watch 3D on this TV, you will need one of these types
of Philips Active 3D glasses. . .
• PTA507
• PTA508
• PTA509
• PTA517
• PTA518
• PTA519
All types are sold separately. Other active 3D glasses might not
be supported.
12.2

The 3D glasses

Overview
1 - On or off switch
2 - Player 1 or player 2 selection
3 - Receiver lens
4 - Battery compartment
When you unpack the 3D glasses, also remove the small plastic
foil from the battery compartment that prevents the battery
from running empty.
Turn on and off
Turn on
When a 3D program is shown on screen, press  on the 3D
glasses and put them on. The glasses need some seconds to
adjust to the 3D signal from the 3D transmitter on the TV. At
first use, this may take up to 15 seconds.
Battery level
You can check the battery level when you turn on the 3D
glasses.
• If the LED light blinks green, you can use the glasses for 4
hours or more.
• If the LED light blinks orange, you can use the glasses for at
least 2 hours but less than 4.
• If the LED light blinks red, the battery is almost empty and less
than 2 hours of 3D watching remain.
Turn off
To turn off the 3D glasses, press . The LED light blinks red 4
times. When the 3D glasses do not receive 3D signals for 2
minutes, the glasses turn off automatically.
3D transmitter
Make sure the receiver lens in the center of the glasses can
receive the 3D signals. Also, clear objects away from the 3D
transmitter on the TV.
1 - 3D transmitter on the TV
2 - 3D receiver on the 3D glasses
Two-player gaming
You can use these glasses to play two-player games. Two players
can watch the same TV but see two different screens to play a
game.
To switch the glasses to watch the Player 1 or Player 2 screen,
turn on the glasses and then press the Player 1/2 key.
• If the LED light is orange and is lit up continuously for 2
seconds, the glasses are set for player 1.
• If the LED light is orange and blinks, the glasses are set for
player 2.
For more information, press
player gaming.
Replacing the batteries
To replace the battery of the 3D glasses PTA508, unscrew the
small battery lid and replace the battery: type CR2032 (3V).
Make sure the + side of the battery is visible. Replace the lid and
fix it with the screw.
To replace the battery of the 3D glasses PTA509, PTA51, press
the small knob on the battery lid and slide the lid up to open.
Replace the battery: type CR2032 (3V). Make sure the + side of
the battery is visible. Replace the lid and slide it down until it
clicks.
 Warning
Danger of explosion if the battery is incorrectly replaced.
Replace only with the same or equivalent type.
Danger
• Do not ingest the battery. Chemical burn hazard.
33
 Keywords and look up Two-