Canon Inner Finisher-L1 Service Manual page 55

4. Check that the stapler unit [1] is at the staple cartridge replacement position as shown in the figure.If it is, close the
finisher front cover to complete the check procedure.
5. If the staple unit is not at the staple cartridge replacement position, perform the following procedure.
The stapler unit's roller may be riding on the base plate. so, slightly lift the stapler unit [1],and rotate the roller toward you to
correct the position.
6. Close the finisher front cover.Open the finisher front cover again, and check that the staple unit is at the staple
cartridge replacement position.
7. Close the finisher front cover.
■ Removing this Machine from the Host Machine. (iR-ADV DX C3800 Series, iR-
ADV DX C3200 Series)
● Procedure
CAUTION:
Check that the main power switch is OFF and the power plug is disconnected from the outlet.
[1]
48
4. Parts Replacement and Cleaning
[1]
[1]