Table of Contents
Advertisement
A FEW SIMPLE RULES WHEN SERVICING
Before working on the rigid dump truck, park it on a level
surface and put it in the SERVICE POSITION:
1. Engine stopped, ignition key removed (except when
service requires engine operation).
2. Tag the rigid dump truck following local lockout and tag
procedure. Identify rigid dump truck as "Out of
Service".
3. If the body is raised, use the body prop cable.
4. The wheels blocked.
5. Hoist lever in "FLOAT" position.
6. Parking brake applied.
7. Allow the rigid dump truck fluid systems to cool down.
8. Pressure released from all lines, tanks, and
accumulators.
If work must be done on a warm rigid dump truck, beware of
hot fluids and components.
Do not perform any work on the rigid dump truck unless you
are authorized to do so.
Maintenance can be dangerous unless performed
properly. Be satisfied that you have the necessary
skills, information, correct tools, and personal protective
equipment to do the job correctly
Standard maintenance procedures should always be
observed. Read the manufacturer's manual or find
assistance if you do not understand what you are doing.
Failure to perform the Basic Preventive Maintenance as
outlined may void rigid dump truck warranty.
Deflate tires before loosening any rim clamp nuts.
Always stop the engine before removing inspection covers.
Do not let tools or parts fall into the opening.
Before you work on the rigid dump truck always lower the
body. If you must work on the rigid dump truck with the body
raised, always securely support the body with the body prop
cable.
SERVICE AND MAINTENANCE / Safety
SA-19
EL20561
Advertisement
Table of Contents
