Removal - Hitachi 6HK1 Workshop Manual

9. Remove the water return pipe from the cylinder head
assembly.
10. Disconnect the water feed pipe from the
turbocharger assembly.
Note：
・ Remove the clip.
11. Remove the water feed pipe from the cylinder block.
Note：
・ Remove the clip.
12. Disconnect the harness connector from the
turbocharger assembly.
13. Remove the turbocharger assembly from the exhaust
manifold.
1. Oil feed pipe
2. Clip
3. Oil return pipe
4. Water feed pipe
5. Water return pipe
5. EGR gas temperature sensor 1 removal
1. Disconnect the harness connector from EGR gas
temperature sensor 1.
2. Remove the harness bracket from the fan guide stay.
3. Remove EGR gas temperature sensor 1 from EGR
pipe A.
1. EGR gas temperature sensor 1
6. EGR gas temperature sensor 2 removal
1. Disconnect the harness connector from EGR gas
temperature sensor 2.
2. Remove the harness bracket from EGR pipe B.
3. Remove EGR gas temperature sensor 2 from EGR
pipe B.
1. EGR gas temperature sensor 2
7. EGR cooler removal
1. Disconnect the water rubber hose from the EGR
cooler.
Mechanical (6HK1) 1B-5