Hitachi 6HK1 Workshop Manual page 33

1. EGR cooler A
2. EGR pipe A
3. Exhaust manifold
8. EGR valve removal
1. Disconnect the harness connector from the EGR
valve.
2. Remove the EGR valve from the inlet pipe.
1. EGR valve
9. Oil separator bracket removal
1. Remove the clip from the cylinder block.
2. Remove the ventilation hose from the air breather.
3. Remove the oil separator bracket from the cylinder
head assembly.
1. Oil separator bracket
2. Clip
10. EGR cooler water pipe removal
1. Remove the EGR cooler water pipe from the engine
assembly.
Mechanical (6HK1) 1B-7