Advertisement
Installation Tools
Long measuring
tape
Vacuum cleaner
Diagonal plier
Installation Procedure
Prepare the installation
Installing the BTS3900B
Installing the BTS3900B
on the wall
Installing the AC power
In working mode, the BTS3900B cannot be placed horizontally or
vertically on flat object, such as table.
Marking pen
Adjustable wrench Cross screwdrivers
Gradienter
Start
Installing the BTS3900B
inside the ceiling void
adapter or PSE
Installing the
BTS3900B cables
Checking the
BTS3900B
End
Percussion drill
Wire stripper
1. When the external antenna is used, you
should connect the antenna to the
BTS3900B before installing the BTS3900B.
The following description is based on the
installation of the BTS3900B configured
with external antenna. The procedure for
on the ceiling
installing the BTS3900B configured with
built-in antenna is the same.
2. When the BTS3900B is installed on the
wall, the integrated mode is recommended.
3. The BTS3900B must be installed at
least 0.5 m away from the interference
sources such as power supply and at least
2 m away from the high frequency
radiation sources.
4 . In POE power supply mode, only one
carrier can be configured for the
BTS3900B.
5 . In AC power supply mode, the distance
between the AC power supply port and the
BTS3900B is no longer than 1.5 m. When
the PoE power supply mode is used, the
distance of the cabling between the PSE
and the BTS3900B is no longer than 50 m.
2
Ladder
Claw hammer
Scissors
Advertisement
