Trouble Shooting - Toshiba RC-10JRNH Instruction Manual

TROUBLE SHOOTING

No.
Malfunction
Heating plate is
not hot.
1 The light
is off.
Heating plate is
hot.
The light is Heating plate is
2
on. not hot.
Cooked rice is crude or time
3
of cooking is too long.
Cook rice burnt or cannot
4
keep warm automatically
Causes
Circuit of electric rice cooker is
not connected to power supply.
1. Wiring connection of indicator
light has loosened.
2. Indicator light is damaged.
1. Wiring in the middle has
loosened.
2. Electric-thermal tube has burnt
out.
1. Cooking time is insufficient.
2. Heating plate is deformed.
3. Inner pot is declined and one
side is hanging in the air.
4. There is foreign matter
between inner pot and heating
plate.
5. Inner pot is deformed.
1. The keys of cooking rice and
lever link gear is not working.
2. The steel magnet temperature
limiter is out of work.
3. The temperature controller is
burnt out wiring of it is
loosened.
6
Solution
Inspect whether the switch, plug and socket
connector, fuse and leading wire of power supply
are in good condition and insert the plug reliably
It should be sent to an authorized service
department for maintenance.
1. Cook rice according to required conditions.
2. The fine sand paper can be used for
correcting slight deformation but the severly
deformed one should be sent to
maintenance department for replacement.
3. Turn the inner pot lightly to make it return to
normal.
4. Clean it up with fine sand paper
5. Send to designated service department.
It should be sent to an authorized
service department for maintenance.