Logitech ZONE VIBE WIRELESS Setup Manual page 6

CONNECT YOUR HEADPHONES
a. Connect via USB-C receiver
1 Insert the receiver into the computer USB-C
port Or insert the USB-C receiver with the
USB-A adapter to the USB-A port
2 Zone Vibe Wireless is already paired to the
receiver it ships with
3 Once successfully paired, the LED light on
the receiver will turn solid white then dim
b. Connect via BLUETOOTH
1 Slide the switch to the bottom in the arrow's
direction for 2 seconds to initiate pairing
2 The LED light will flash white rapidly
3 Open Bluetooth settings on your device
®
4 Select Logi Zone Vibe Wireless in discoverable
devices
5 Once successfully paired, the LED light will
turn solid white
ADJUSTING HEADPHONES
1 Adjust the headphones by sliding earcups
up and down the extended part of the
headband
2 It may be easier to adjust the headphones
on your head Slide the earcups up and down
the headband until they sit comfortably on
your ears
®
USB-C
USB-A
2 sec.
LOGI Zone
Vibe Wireless
6 English