Trigger Device Warm Start With Command; Host Name And Description; Host Name; Description, Name Of Contact And Location - Hitachi EDS500 Series Manual

Cold start and warm start
2.5.2

Trigger device warm start with command

Commands for restart of device
< r e l o a d >
< r e l o a d - d e f a u l t - c o n f i g >
2.6

Host name and description

Besides a host name further metadata can be set to describe EDS500 500FSD20 modems to grant
unique identification and easy location in the network. Especially in larger networks this feature
becomes important.
2.6.1

Host name

The host name is the unique identification for a device in the network. The host name of an EDS500
Modem may be up to 20 characters long and consists of any combination of characters, numbers
and special characters.
The default value for host name is: modem.
A host name should consist only of 'A'-'Z', '0'-'9', '-' and '.' and the case is not significant.
Do not use any special characters or the underscore to comply with RFC 1123 (Requirements for
Internet Hosts).
Command to set the host name
< s e t s y s t e m h o s t n a m e { n a m e } >
The host name is used as prompt at the command line interface (CLI).
Display of the host name as prompt at the command line interface (CLI)
m o d e m # s e t s y s t e m h o s t n a m e t e s t
< s e t s y s t e m h o s t n a m e * >
H o s t n a m e s e t .
t e s t #
2.6.2

Description, name of contact and location

Setting this meta data is optional. Use the descriptions to e.g. save identification data for your
organisation.
The maximum length is 50 characters.
The default value for a description is empty.
Commands to set system descriptions
< s e t s y s t e m d e s c r i p t i o n { t e x t } >
< s e t s y s t e m c o n t a c t { t e x t } >
< s e t s y s t e m l o c a t i o n { t e x t } >
16
A D V I C E
Functions
1KGT151043 V001 1