HP 7506 Product End-Of-Life Disassembly Instructions page 5

1. Remove the nine fans 9-2 from fan frame 9-1;
2. Unscrew the screws on PCB 9-3, and then remove PCB 9-3;
3. Remove all of the inner cables;
4. Unscrew the screws on handle 9-4, and then remove handle 9-4;
5. Remove film 9-5 from fan frame 9-1;
6. Remove shielding finger 9-6 from fan frame 9-1.
3.2 Material of the facility built
Facility Components
1
2
3
4
4-1
4-2
4-3
4-4
5
5-1
5-2
6
6-1
7
EL-MF877-00
Template Revision B
Figure 6 Treatments to fan module 9
Material Weight
(g)
Fe 23254
Fe 932
58
ABS
Fe 1566
Complex PWB 528
Fe 92.7
Complex PWB 1000
Fe 1487
Complex PWB 1000
Fe 303*6
Complex 8021
PWB+Fe
Weight Selective treatment for
percentage materials and components
47.94%
1.92%
0.12%
3.23%
1.09% The surface of PCB is
greater than 10
square centimeters
0.19%
2.06% The surface of PCB is
greater than 10
square centimeters
3.07%
2.06% The surface of PCB is
greater than 10
square centimeters
3.75%
16.54% 1. Containing
brominated flame
retardants ;
2. The surface of
PCB is greater
than 10 square
centimeters;
3. Electrolyte
Details
Fe recycling
Fe recycling
Pla recycling
Fe recycling
Fe recycling
Fe recycling
Fe recycling
Fe recycling
Page 5