DeWalt DXFP210050 Instruction Manual page 11

INSPECTION
Frequency:
a ) Inspect the equipment visually before each use.
b ) The components must be inspected by a
Competent person other than the user at least
once a year. Record the results of each inspection
in the inspection log.
Rope Grabs:
a ) Inspect for physical damage, cracks, wear and
corrosion.
b ) Check cam and springs for damage or loss of
tension.
c ) Check pawl and locking mechanism.
d ) Be sure that all parts move freely without
hesitation.
e ) Check rivets for damage, cracks, wear or
corrosion.
f ) Inspect for malfunctioning components, broken
or missing springs.
Products Details
Model of Lifeline
DXFP100025
DXFP100050
DXFP100100
DXFP101025
DXFP101050
DXFP101100
Model of Rope Grab
Assembly
DXFP150020/
DXFP150010/
DXFP150000
DXFP150020/
DXFP150010/
DXFP150000
DXFP150020/
DXFP150010/
DXFP150000
DXFP150020/
DXFP150010/
DXFP150000
DXFP150020/
DXFP150010/
DXFP150000
DXFP150020/
DXFP150010/
DXFP150000
Vertical Lifelines:
a ) Rotation of the rope lifeline while inspecting
from end-to-end will bring to light any fuzzy,
worn, broken or cut fibers. Weakened areas from
extreme loads will appear as a noticeable change
in original diameter. Following a brief break-in
period, the rope diameter should be uniform
throughout..
b ) Snap Hooks : Inspect closely for hook and eye
distortions, cracks, corrosion, or pitted surfaces.
c ) The gate (latch) should seat into the nose
without binding and should not be distorted or
obstructed.
d ) The gate spring should exert sufficient force to
firmly close the gate. Gate locks must prevent the
gate from opening when the gate closes.
e ) Thimbles: The thimble must be firmly seated in
the eye of the splice, and the splice should have
no loose or cut strands. The edges of the thimble
must be free of sharp edges, distortion, or cracks.
f ) If inspection reveals a defect in condition, remove
the device from service. Any equipment that
has been subjected to a fall should be removed
from service. Products removed from service
should be disposed of in a manner that prevents
inadvertent further use.
Description
5/8 inch (16mm) Poly
steel twisted rope
lifeline
5/8 inch (16mm) Poly
steel twisted rope
lifeline
5/8 inch (16mm) Poly
steel twisted rope
lifeline
5/8 inch (16mm) Poly
steel twisted rope
lifeline
5/8 inch (16mm) Poly
steel twisted rope
lifeline
5/8 inch (16mm) Poly
steel twisted rope
lifeline
Material
For Rope: Poly Steel
For Metal: Alloy Steel
For Rope: Poly Steel
For Metal: Alloy Steel
For Rope: Poly Steel
For Metal: Alloy Steel
For Rope: Poly Steel
For Metal: Alloy Steel
For Rope: Poly Steel
For Metal: Alloy Steel
For Rope: Poly Steel
For Metal: Alloy Steel
English
Length
25 ft. (7.62 m.)
50 ft. (15.24 m.)
100 ft. (30.48 m.)
25 ft. (7.62 m.)
50 ft. (15.24 m.)
100 ft. (30.48 m.)
9