DeWalt DXFP210050 Instruction Manual page 7

WARNING:
Read all safety warnings, instructions, illustrations and specifications provided with this product.
Failure to follow all instructions listed below may result in serious injury.
a ) A Competent person must ensure the compatibility of all connections and that of the system.
b ) Do not use the system if the device does not lock onto the lifeline or if any component in the system does not
operate properly.
c ) The device and lifeline should be installed and used in such a manner as to reduce the potential for a swing
fall.(see illustration below)
d ) Allow sufficient clearance in the event of a free fall.
e ) For synthetic rope lifelines, add 1ft. (0.3m) of fall clearance for each 20 feet (6m) of rope between the
rope grab and anchor. If a energy absorber is used, you must also allow for an additional 3-1/2 ft. (1.06m)
maximum elongation.( ANSI Z359.1)
f ) System must be rigged to limit the free fall distance to 6 feet (1.8m) or less.
g ) Only use self-locking snap hooks with this equipment.
Restraint
Lifeline
Swing Fall Hazard
SYSTEM
Lanyard
Energy Absorber
APPLICATIONS
Fall Arrest
Lifeline
English
Rope Grab
Energy Absorber
Lanyard
5