Page 1
Heat pump Water Heater Operation and Installation Manual ELECTRICITE Model HP200M3 HP250M3 HP250M3C Please read this manual carefully prior to your use of this water heater. The appearance of the water heater given in this manual is for reference only.
Operation and functions Display Functions & Protections Electrical leakage protection The control system of this machine features an electricity leakage protection function. 3-minutes protection When starting the machine after electricity input, the system will start after approximately 3 minutes ,which is considered to be normal. 10-minutes protection When restarting the machine immediately after shutdown, the system goes into the protection mode and starts after...
Page 3
Description of the pictograms Symbol Description Power ON/OFF switch Working mode selection Confirm button Timer adjust Boost mode. Heat pump and auxiliary power activated at the same time. Auto mode -Optimised management of the heat pump and the electrics for guaranteed comfort; - Prior using heat pump;...
Operating functions Installer settings - To open the installer settings, press switch off the system, then press at the same time for 10 seconds. - When menu is open, press to change the value of the settings. - Press to confirm the settings. - Press to close the menu.
Checking and maintenance - Installation and maintenance of the appliance must be done by a qualified professional . - Before working on the appliance,Shut down the machine and cut off the power supply . - Do not touch with wet hands. - Maintenance operations are important to guarantee optimum performance and extend the life of the equipment.
Page 6
Faults and protection Digital Release Action Fault type indication Operating temperature protection Air exhaust temperature protection Compressor protection After fault is solved, Evaporation high temperature switch on power protection supply for release Compressor over-current Over-current protection protection Electricity leakage alarming The system will automatically cut off power supply if any line fault occurs Over temperature alarming The actual water temperature≥85℃...