Advertisement
5. OPERATION
5.1.
The spreader is designed to be pushed at three miles an hour, which is a brisk walking pace. Slower or faster speeds will change the
spread pattern. Wet fertiliser will also change the level of coverage you require.
5.2.
Clean the spreader thoroughly after each use paying particular attention to the shut off plate and the bottom of the hopper.
6. MAINTENANCE
6.1.
After each use clean material out of hopper.
6.1.1.
Rinse/dry inside and outside of spreader after each use.
6.2.
Periodically check all fastenings are tight.
6.3.
Annually clean and lightly lubricate parts.
6.4.
Touch up all scratched or worn painted metal surfaces.
6.5.
To avoid damaging the spreader never exceed the rated load capacity of 27kg.
6.6.
STORAGE.
6.6.1.
Before storing ensure that the spreader is clean and dry.
6.6.2.
Store indoors or in a protected area during severe weather and in the winter months.
6.6.3.
Never allow material to stay in the hopper for extended periods of time.
fig.9
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted,
taken to a recycling centre and disposed of in a manner which is compatible with the environment. When the product
becomes completely unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and
dispose of the product and fluids according to local regulations.
Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice.
Important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500
© Jack Sealey Limited
fig.10
sales@sealey.co.uk
Original Language Version
www.sealey.co.uk
SPD37W Issue 3 (H,2,3,F)
04/05/23
Advertisement
