Configuring Dcom - ABB COM600 3.5 User Manual

3.6.
3.6.1.
68
Station Automation COM600 3.5
External OPC Server User's Manual
Property/Para- Value or Value range/ Default
meter /Example
Neutral Max Limit 20000
Neutral Min Limit 0
Phase Hi Limit 0
Phase HiHi Limit 0
Phase Lo Limit 0
Phase LoLo Limit 0
Phase Max Limit 20000
Phase Min Limit 0
Res Hi Limit 0
Res HiHi Limit 0
Res Lo Limit 0
Res LoLo Limit 0
Res Max Limit 20000
Res Min Limit 0

Configuring DCOM

Configuring DCOM
Between the client and the server computer, user authentication is required. In practice,
the same user account with the same password must exist both in the COM600 computer
and the 3rd party OPC Server computer. The OPC Server must be run within this user
account.
Run the OPC DA client in COM600 Computer within a preconfigured user account
named as COM600 (default factory password: aEc2006rs). It is recommended to create
the COM600 user in the server computer as well, and run the OPC server within this
user account.
If you want to change the default COM600 user's password,
you must do it with the management tool in SAB600, as the
password is configured in the DCOM configuration for each
component in COM600.
You must also configure the DCOM in both COM600 and server computer. Do this with
the DCOMCNFG program.
Description
Max limit for neutral
Min limit for neutral
Hi limit for phase
HiHi limit for phase
Lo limit for phase
LoLo limit for phase
Max limit for phase
Min limit for phase
Hi limit for res
HiHi limit for res
Lo limit for res
LoLo limit for res
Max limit for res
Min limit for res
1MRS757274