Table of Contents
Advertisement
1MRS757275
3.3.
3.3.1.
3.3.2.
3.3.3.
COM600 series, version 4.1
IEC 61850 Proxy Server User's Manual
Building object tree
General about building object tree
The object tree is built in the Communication structure of SAB600, see Figure 3.2-1. It
is built by adding objects in a logical order starting from the OPC Server object.
Before the IEC 61850 Proxy Server can be taken into use, you need to configure an OPC
server for the process communication. For more information on creating an OPC server,
refer to COM600 User's Manual.
You have two ways to add objects to the object tree in the Communication structure:
•
You can right-click the object to which you want to add a child object.
•
You can copy the object.
First add the IEC 61850 Proxy Server OPC Client. The following objects are created by
the Proxy Configuration Tool, and should not be added manually:
•
IEC 61850 Proxy Subnetwork
•
IEC 61850 Proxy IED
•
Logical Devices
•
Data objects
Adding IEC 61850 Proxy Server OPC Client object
To add the IEC 61850 Proxy Server OPC Client object:
1. Add the IEC 61850 Proxy Server OPC Client object in the Communication structure
by selecting the Gateway object.
2. Right-click the Gateway object and select the server object, for example New >
IEC61850 > IEC61850 Proxy Server OPC Client.
Configuring IEC 61850 Proxy Server with Proxy Configuration
Tool
Before configuring Proxy IEC 61850 Proxy Server, an OPC
server handling the IED communication needs to be configured
to the communication structure.
To configure IEC 61850 Proxy Server with the Proxy Configuration Tool:
1. Right-click the IEC 61850 Proxy Server OPC Client object and select Proxy Config
Tool.
17
Advertisement
Table of Contents
