RUGGEDCOM WIN5118
Installation Guide
4
Figure 1: RUGGEDCOM WIN5118 (AC Model)
1. ANT 1 Port 2. ETH/PWR Port 3. RSSI LEDs 4. W.LINK LED 5. PWR LED 6. ANT 2 Port 7. Chassis Ground
Figure 2: RUGGEDCOM WIN5118 (DC Model)
1. 12VDC Port 2. ANT 1 Port 3. ETH/PWR Port 4. RSSI LEDs 5. W.LINK LED 6. PWR LED 7. ANT 2 Port 8. Chassis Ground
ANT 1 and ANT 2 Ports
RSSI LEDs
W.LINK LED
Description
3
RSSI
W.LINK
PWR
4
RSSI
5
W.LINK PWR
Ports for connecting primary and secondary external antennas. For information about
connecting the antennas, refer to
Indicates the received signal strength.
LED
Indicates when the subscriber unit is connected with a base station.
ANT 1
1
ETH/PWR
2
RSSI
W.LINK
PWR
5
12VDC
1
ANT 1
2
3
ETH/PWR
RSSI
W.LINK PWR
6
Section 2.6, "Installing the
ANT 2
6
7
ANT 2
7
8
Antennas".
RSSI Level
< -90
-85 to -90
-80 to -85
-75 to -80
-70 to -75
-65 to -70
-20 to -60
> -20
Chapter 1
Introduction
3