WARNING:
Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your
your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Procedure
1
Align the screw holes on the fan with the screw holes on to the palm rest and keyboard board assembly.
2
Route the display cable through the routing guides on the fan.
3
Replace the three screws (M2.5x5) that secure the fan to the palm rest and keyboard board assembly.
4
Connect the fan cable to the system board.
36
Replacing the fan
computer. After working inside your computer, follow the instructions in
Replacing the fan
After working inside
www.dell.com/
17