Husqvarna 236R Operator's Manual page 16

there are obstacles such as stones, branches and
ditches.
• Do an overhaul inspection of the product.
• Do the safety inspections, maintenance and
servicing that are given in this manual.
• Make sure that all covers, guards, handles and the
cutting equipment are correctly attached and not
damaged.
• Make sure that there are no cracks at the bottom of
the saw blade or grass blade teeth or by the center
hole of the blade. Replace the blade if it is damaged.
• Examine the support flange for cracks. Replace the
support flange if it is damaged.
• Make sure that the locknut can not be removed by
hand. If you can remove it by hand, it does not lock
the cutting attachment sufficiently and you must
replace it.
• Examine the blade guard for damages or cracks.
Replace the blade guard if it has been hit or if it has
cracks.
• Examine the trimmer head and cutting attachment
guard for damages or cracks. Replace the trimmer
16
head and cutting attachment guard if they have been
hit or if they have cracks.
To start a cold engine
1. Move the stop switch to the start position.
2. Push the air purge bulb until fuel starts to fill the air
purge bulb.
3. Move the choke control to the choke position.
4. Hold the product to the ground.
1395 - 004 - 14.09.2020