To add grease to the bevel gear
•
Make sure that the bevel gear is filled ¾ full with
bevel gear grease.
To examine the spark plug
CAUTION: Always use the recommended
spark plug type. Incorrect spark plug type
can cause damage to the product.
•
Examine the spark plug if the engine is low on
power, is not easy to start or does not operate
correctly at idle speed.
•
To decrease the risk of unwanted material on the
spark plug electrodes, obey these instructions:
a) Make sure that the idle speed is correctly
adjusted.
b) Make sure that the fuel mixture is correct.
c) Make sure that the air filter is clean.
•
If the spark plug is dirty, clean it and make sure that
the electrode gap is correct, refer to
on page 26 .
•
Replace the spark plug if it is necessary.
24
To sharpen grass cutters and grass
blades
•
Sharpen all edges of the grass cutters and blades
equally to keep the balance. Use a single-cut flat file.
To sharpen the saw blade
•
To sharpen the blade correctly, refer to the
instructions that come with the blade.
•
Make sure that the product and blade has sufficient
Technical data
support when you sharpen it.
•
Use a 5.5 mm (7/32 in) round file with a file holder.
•
Hold the file at an angle of 15°.
WARNING: Stop the engine. Use protective
gloves.
1395 - 004 - 14.09.2020