Siemens SITRANS LG260 Operating Instructions Manual page 24

Units
Probe length
24
Setup: Settings, e.g. medium, application, vessel, adjustment, damp-
ing, device units, unit SV 2, false signal suppression, linearization
Display: Language setting, settings for the measured value indication
as well as lighting
Diagnosis: Information, e.g. on instrument status, pointer, measure-
ment reliability, simulation, echo curve
Additional adjustments: e.g. date/time, reset, copy sensor data
Info: Instrument name, hardware and software version, date of manu-
facture, device ID, instrument features
Note:
For optimum adjustment of the measuring point, the individual sub-
menu items in the main menu item "Setup" should be selected one
after the other and provided with the correct parameters. If possible,
go through the items in the given sequence.
The procedure is described below.
The following submenu points are available:
The submenu points are described below.
6.4.1 Setup
In this menu item you select the distance unit and the temperature
unit.
For the distance units you can choose between m, mm and ft and for
the temperature units °C, °F and K.
In this menu item you can enter the probe length or have the length
determined automatically by the sensor system.
When choosing "Yes", then the probe length will be determined
automatically. When choosing "No", you can enter the probe length
manually.
SITRANS LG260 - Operating Instructions PBD-51041061