3.6.8
Onboard Devices Configuration
The items in this menu allow you to switch between PCIe Lanes and configure onboard
devices.
HD Audio Controller
This item allows you to use the Azalia High Definition Audio Controller
Configuration options: [Disabled] [Enabled]
SATA mode Configuration: [SATA_12][M.2_1]
[Auto]
Auto-detects the M.2 device mode. If a SATA device is detected,
SATA6G_1 will be disabled.
[SATA mode]
Only supports M.2 SATA devices. Please note that SATA6G_1 port cannot
be used in this mode.
[PCIE mode]
Only supports M.2 PCIE devices.
SATA mode Configuration: [SATA_56][M.2_2]
[X2]
Run at X2 mode with SATA6G_56 enabled.
[X4]
Run at X4 mode for higher performance with SATA6G_56 disabled.
USB Type C Power Switch
[Auto]
The system will automatically detect your USB Type C devices and provide
suitable power if needed.
[Enabled]
The USB Type C port will always provide power to your devices.
RGB LED lighting
This item allows you to turn the RGB LED lighting on or off.
Configuration options: [On] [Off]
Intel LAN Controller
This item allows you to enable or disable the Intel LAN controllers.
Configuration options: [Disabled] [Enabled]
ASUS PRIME Z270-AR Series
3-19