Pairing Your Mobile Mic Gateway With Wrsm; Pairing Your Mobile Mic Gateway With Wireless Ptt - Motorola PMMN4097 User Manual

Pairing Your Mobile Mic Gateway with
WRSM
Procedure:
1
Ensure both the Mobile Mic Gateway and WRSM are powered on.
2
Place the blue dot (secure pairing spot) on the Mobile Mic Gateway
within one inch of the blue dot (secure pairing spot) on the WRSM.
The Mobile Mic Gateway allows a maximum of one wireless audio
device and one wireless PTT device to pair with it.
3
Mobile Mic Gateway needs to be re-paired (reconnected) upon
each power up.
NOTE:
If the Mobile Mic Gateway to be paired with other wireless
device such as wireless PTT, the device has to be placed in a
pairing mode.
Align
Mobile Mic
Figure 3.3: Pairing your Gateway with WRSM
IMPORTANT
: There will be no audio from the Mobile Radio once the
WRSM is paired with the Mobile Mic Gateway. The
system is not designed to have audio coming from both
the Mobile Radio and WRSM simultaneously. Pressing
the PTT button on the Mobile Mic Gateway while the
WRSM is in use will disconnect the WRSM and revert
the audio back to the Mobile Radio.
Pairing Your Mobile Mic Gateway with
Wireless PTT
Procedure:
1
Ensure both the Mobile Mic Gateway and wireless PTT are
powered on and in pairing mode.
2
Place the blue dot (secure pairing spot) on the Mobile Mic Gateway
within two inches of the blue dot (secure pairing spot) on the
wireless PTT.
3
The wireless PTT connection range with Mobile Mic Gateway is
within 10 meters. Do take note that the wireless PTT will have a
shorter connection range compared to the WRSM.
IMPORTANT
: If the wireless PTT paired with the Mobile Mic Gateway
before the audio device, the pairing will be saved but the
wireless PTT will be disconnected. The wireless PTT
will connect when an audio device is connected.
19
English