Error Indicator; Charging Indicator; Connection Status Indicator - Bosch GXS18V-17N17 Operating/Safety Instructions Manual

2610051871.qxp_GAL18V-160C 4/27/20 11:08 AM Page 11
charger monitors the temperature of the
inserted battery. As soon as the battery
temperature is above approx. 32 °F (0 °C),
the battery will be cooled by a fan.
"Power Boost" button
Pressing the "Power Boost" button 6
activates the "Power Boost" charging mode
(rapid charging). The button can be
pressed either before or after the battery
has been inserted into the charger. The
"Power Boost" button lights up red when
the "Power Boost" charging mode (rapid
charging) is enabled. Pressing on the
"Power Boost" button again returns the
charger to the Standard Charging Mode.
Once the rapid charge has finished (at
around 50% battery capacity), the light on
the "Power Boost" button will turn off and
the battery will continue to charge up to
around 80% battery capacity.
Only compatible batteries are able to rapid
charge in "Power Boost" mode. See table
on page 6 for approximate charging times
with "Power Boost" mode.
Indicator Lights

CHARGING INDICATOR

In standby mode, the bottom LED on the
battery charging indicator 7 is continuously
lit green.
battery capacity of approximately 20%.
Each flashing LED represents the maximum
level of charge that will be achieved in the
current charging mode. "Power Boost"
mode
(continuous or flashing). Lifetime Mode
and second stage of "Power Boost" mode
< 20% 20%
ind Quality Products Online at:
Operating Instructions
The five green LEDs indicate the
battery's state of charge during
and after charging.
continuously lit LED represents a
(first 50%) three
40% 60%
GlobalTestSupply
www.
(50%-80%) four LEDs lit (continuous or
flashing). Standard mode five LEDs lit
(continuous or flashing).

ERROR INDICATOR

range. The charging process begins as soon
as the permitted temperature range has
been reached.

CONNECTION STATUS INDICATOR

Audio signal
The audio signal can be switched on or off
via the Bosch ToolBox app.
When the audio signal is switched on, the
charger emits a short tone once the
specified charging cycle is complete.
When the Bosch Toolbox app is used to
restore the charger to factory settings a
longer tone is emitted.
Restoring factory default settings
If the "Power Boost" button 6 is held down
Each
for five seconds, the charger is restored to
factory default settings. The "Power Boost"
button will flash and a long audio signal is
emitted.
Factory default settings can also be
restored using the Bosch Toolbox app.
LEDs lit
80% > 95%
11
The continuous red light 5
indicates that the temperature of
the battery is outside
permitted charging temperature
The flashing red light 5 indicates
that the battery or charger needs
to be serviced.
The flashing blue light 4 indicates
that there is a connection to your
mobile device and/or data transfer
is in progress.
.com
sales@GlobalTestSupply.com
the