Basic Operation - Sharp PN-425 Operation Manual

2
5
7
1. INPUT (Input mode selection)
The menu is displayed. Press
mode, and press
to enter.
* You can select the input terminal by pressing the input
switch of the monitor.
Input mode
PC digital RGB input
DIGITAL
terminal
PC analog RGB input
ANALOG1
PC
terminal
input
PC analog RGB input
ANALOG2
terminals (BNC)
Component video input
COMPONENT
terminals
AV
input
Composite video input
VIDEO terminals or S-video
input terminal
2. DISPLAY
Displays monitor information. The display disappears when
this button is pressed again or disappears automatically after
approximately 15 seconds.
INFORMATION
INPUT MODE
SIZE
MODE
BRIGHT
VOLUME
OFF TIMER
ID No.
MODEL
S/N
1 0 2 4 x 7 6 8

Basic Operation

1
3
4
6
8
or to select the input
Video Audio
PC audio input
terminal
Audio input
terminals
(COMPONENT)
Audio input
terminals (VIDEO)
ANALOG1
: ANALOG1
: WIDE
: STD
: 22
: 15
: 10:59
: 0
: PN-425
:
V: 60 Hz H: 48.4 kHz
3. MODE (Screen mode selection)
Each time you press this button, the screen mode changes in
the following order:
STD (Standard) → OFFICE
→ STD (Standard) ...
*1 Display brightness is lowered. (This mode saves power.)
*2 When the input mode is DIGITAL/ANALOG1/ANALOG2.
sRGB is international standard of color representation
specified by IEC (International Electrotechnical
Commission). Color conversion is made in taking account
of liquid crystal's characteristics and represents color tone
close to its original image.
4. SIZE (Screen size selection)
Each time you press this button, the screen size changes in
the following order: (See page 4.)
WIDE → ZOOM1 → ZOOM2 → NORMAL
→ Dot by Dot → WIDE ...
5. MUTE
Turns off the volume temporarily.
Press the MUTE button again to turn the sound back to the
previous level.
6. MENU
Displays and turns off the menu screen (see page 5).
7. VOL +/- (Volume adjustment)
Pressing or displays the VOLUME menu when the
menu screen is not displayed.
V O L U M E
Press or to adjust the volume of the sound.
* If you do not press any buttons for about 4 seconds, the
VOLUME menu automatically disappears.
8. BRIGHT +/- (Backlight adjustment)
Pressing or displays the BRIGHT menu when the menu
screen is not displayed.
B R I G H T
Press or to adjust the brightness.
* If you do not press any buttons for about 4 seconds, the
BRIGHT menu automatically disappears.
*1 *2
→ VIVID → sRGB
15
15
3
E