LG A9T Series Owner's Manual
  1. Manuals
  2. Brands
  3. LG Manuals
  4. Vacuum Cleaner
  5. A9T Series
  6. Owner's manual

LG A9T Series Owner's Manual

Hide thumbs Also See for A9T Series:
Table of Contents

Advertisement

Quick Links

Download this manual
OWNER'S MANUAL
VACUUM CLEANER
Before beginning installation, read these instructions
carefully. This will simplify installation and ensure that the
product is installed correctly and safely. Leave these
instructions near the product after installation for future
reference.
ENGLISH
A9T******
MFL71880935
Rev.00_051523
Copyright © 2023 LG Electronics Inc. All Rights Reserved.
www.lg.com

Advertisement

Table of Contents
loading

Related Manuals for LG A9T Series

Summary of Contents for LG A9T Series

  • Page 1 This will simplify installation and ensure that the product is installed correctly and safely. Leave these instructions near the product after installation for future reference. ENGLISH A9T****** www.lg.com MFL71880935 Rev.00_051523 Copyright © 2023 LG Electronics Inc. All Rights Reserved.

  • Page 2: Table Of Contents

    OPERATION Getting Started ....................19 Charging the Battery ..................21 Using the Steam Mop Nozzle .................22 Using the Nozzles and Tools................31 SMART FUNCTIONS Using LG ThinQ Application................35 Smart Diagnosis Function................37 MAINTENANCE Cleaning the Appliance ...................38 Cleaning the Nozzles ..................42 TROUBLESHOOTING Before Calling for Service................47...

  • Page 3: Read All Instructions Before Use

    SAFETY INSTRUCTIONS SAFETY INSTRUCTIONS READ ALL INSTRUCTIONS BEFORE USE The following safety guidelines are intended to prevent unforeseen risks or damage from unsafe or incorrect operation of the appliance. The guidelines are separated into ‘WARNING’ and ‘CAUTION’ as described below. Safety Messages This symbol is displayed to indicate matters and operations that can cause risk.
  • Page 4 If the appliance is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, return it to an LG Electronics service centre. • Do not pull or carry by cord, use cord as a handle, close a door on cord, or pull cord around sharp edges or corners.
  • Page 5 SAFETY INSTRUCTIONS • When disposing of this appliance, follow regulations for disposal of rechargeable lithium-ion batteries. • Follow all local ordinances and regulations when handling or disposing of the battery. • Prevent unintentional starting. Ensure the switch is in the off position before connecting to the battery pack, picking up or carrying the appliance.
  • Page 6 • Never attempt to operate this appliance if it is damaged, malfunctioning, partially disassembled, or has missing or broken parts, including a damaged cord or plug. Take it to an authorized LG Electronics service centre or dealer for assistance. • Do not apply excessive force to the power cord to bend it, or place it under a heavy object as this will damage it.
  • Page 7 • Do not cover the power cord with a rug or carpeting. • Push the power plug firmly into the wall outlet so that it is not loose. • If the product has been submerged, contact an LG Electronics service centre or dealer for instructions before resuming use.
  • Page 8 • If the earth leakage breaker is tripped when the product is put on the charging station, immediately remove the appliance from the charging station. Contact an LG Electronics customer service centre. • Use extra care when cleaning on stairs.
  • Page 9 SAFETY INSTRUCTIONS Maintenance • Make sure to unplug the power cord when cleaning or maintaining the charging station. • Do not wash the inlet port or the dust bin with water or detergent. • Do not use detergents, polishes or air fresheners to clean the dust bin.
  • Page 10 SAFETY INSTRUCTIONS • Do not insert your fingers into the steam mop nozzle while it is working. • Do not separate the water tank from the steam mop nozzle or add water to the water tank while the power is on or cleaning in progress. Doing so may result in burns due to steam or hot water.

  • Page 11: Caution

    SAFETY INSTRUCTIONS Warning : Steam. Risk of burns. • The pressure of generated steam is less than 50 kPa. CAUTION CAUTION • To reduce the risk of injury to persons, malfunction, or damage to the product or property when using the appliance, follow basic safety precautions, including the following: Operation •...
  • Page 12 SAFETY INSTRUCTIONS Steam Mop Nozzle • Do not use the steam mop nozzle for any purpose(for example, polishing a car, cleaning windows) other than domestic floor cleaning. • Do not use the steam mop nozzle to vacuum up liquids(water, beverage). •...

  • Page 13: Installation Product Overview

    INSTALLATION INSTALLATION Product Overview The images in this guide may be different from the actual components and accessories, which are subject to change by the manufacturer without prior notice for product improvement purposes. Front View *1 This feature is only available on some models. Product Body Extension Pipe Nozzle...
  • Page 14 INSTALLATION NOTE • Use the vacuum cleaner only with the provided charging station. Using a charging station other than the one designed to be used with the vacuum cleaner, as improper sealing of the chagring station may result and dust not being emptied from vacuum cleaner.
  • Page 15 Measuring Cup NOTE • The mop pads, batteries, exhaust filter and the pre-filter will eventually need to be replaced. Contact an LG Electronics customer service centre. • Batteries are not included in the battery pocket. Multi-Surface Nozzle Wide Hard Floor Nozzle...
  • Page 16 Individually measured data would be different from a lab test result. • Battery run time is the result of using a fully charged battery according to the LG Electronics test standard. Results may be different depending on actual use environment and period of use.

  • Page 17: Storing The Accessories

    INSTALLATION Storing the Accessories Storing on Sides Assembling and Storing the Open the nozzle hook on both sides of the Appliance product. • To open the nozzle hooks, press on the right Follow these steps to safely assemble the side. Be careful not to pinch fingers when appliance.
  • Page 18 INSTALLATION Storage Inside • Before moving the product, unplug it and remove the vacuum cleaner, nozzles, and accessories. Open the left door of the product and insert the bedding nozzle or the pet nozzle storage. Open the right door and insert the combination tool , the crevice tool and the...

  • Page 19: Operation Getting Started

    Please contact LG they click into place. The nozzles and tools can Electronics customer information centre if the also be attached to the end of the extension problem persists.
  • Page 20 • Press the Power button to activate Normal mode. • This indicator blinks when the appliance is connecting to the LG ThinQ application or Suction Power Up (+) Button / Turbo Mode home Wi-Fi network, and the indicator lights • Press the + button to increase the suction up when the connection is complete.

  • Page 21: Charging The Battery

    OPERATION • As the product is charging, bars light up on charging station only after removing the the battery level indicator to indicate the level combination tool or the crevice tool, if either of charge. happens to be fitted • Once the battery is fully recharged, 3 bars will •...

  • Page 22: Using The Steam Mop Nozzle

    OPERATION • The battery pocket does not have a charging Lift the front of the control panel located at the function. Separate the battery from the battery top of the charging station. pocket and charge it using the charging station. Using the Steam Mop To insert, align the battery with the outline of the battery charger.
  • Page 23 • Do not use a soiled mop pad to clean floors. • Clean only with the mop pads for the steam mop nozzle provided when purchasing from LG Electronics. The mop pads from other products may reduce cleaning performance.
  • Page 24 OPERATION Alarm and LED by Steam Mop Nozzle Condition When using the steam mop nozzle, check the operation status through the alarm and LED for each condition. Nozzle Front LED Battery Pocket LED Condition Alarm and LED by Condition Vacuum cleaner The nozzle front LED of the power off steam mop nozzle is on and the...
  • Page 25 OPERATION Nozzle Front LED Battery Pocket LED Condition Alarm and LED by Condition The steam mode is The nozzle front LED is on and in use. the battery pocket LED turns off. Discharged battery • The steam mode will no in the battery pocket longer operate but the mop pads will continue to rotate.
  • Page 26 OPERATION Using the Steam Mop Nozzle extended period of time. Failure to do so may result in product failure. Press the Power button. You can use the only mop • Do not use on PVC or PU mats for infants or mode and not turn on the dust suction function.
  • Page 27 OPERATION • If the water inlet cap is not closed properly, • Use wet mop pads instead of dry mop pads water may leak. when using steam mode Attach the water tank to the mop nozzle again. Place the mop nozzle upside down on the floor. •...
  • Page 28 OPERATION When using the steam mode, a constant amount of Insert the steam mop nozzle into the extension water is supplied regardless of the operation of the pipe and connect it to the product body. When water adjustment buttons. you press the Power button on the product body, the steam mode will be turned on and preheating will begin.
  • Page 29 OPERATION Separating the Battery Pocket pocket and charge it using the charging station. Separate the battery pocket by pressing the PUSH button on the bottom of the battery pocket and sliding it upward off the mop nozzle. WARNING Press the release button and separate the extension pipe.
  • Page 30 OPERATION • Do not pull or stretch the rubber gasket on the NOTE water supply inlet. Doing so may tear or damage • When cleaning with steam, press the steam • Do not add detergent, vinegar or baking soda to button to turn off the steam mode and use the the water tank when washing it.

  • Page 31: Using The Nozzles And Tools

    OPERATION Using the Nozzles and • Keep the water tank after water is completely empty and dry. Moisture or Tools residual water in the tank may cause odour. Before Using the Nozzles and Tools Some accessories are only available on some models.
  • Page 32 OPERATION Pet Nozzle • Use it with the Turbo mode to clean pet hair out of furniture, mats, or tight areas like corners. It is suitable for soft surfaces and pet hair removal. Combination Tool CAUTION Can be used in either crevice mode or brush mode •...
  • Page 33 OPERATION Hard Dirt Tool • To convert back to the crevice mode, press in on the brush release button and slide the brush Firm bristles remove solidified dirt from hard surfaces. Clean up hair or foreign objects that are entangled in carpets or rugs. Adjusting the Length To adjust the length of the tool, press and hold the release button...
  • Page 34 OPERATION • The flexible hose extension cannot be used with the power drive Nozzle. Using the Kompressor Lever Use the Kompressor lever to compress hair and fibers inside the dust bin after vacuuming and before emptying the dust bin. • The vacuum must be turned off before using the Kompressor lever.

  • Page 35: Smart Functions

    - Guide to cleaning the filters. • Smart Diagnosis™ Run the LG ThinQ app and sign in with your - This function provides useful information for existing account or create an LG account to diagnosing and solving issues with the sign in.
  • Page 36 Internet service provider or refer to your The appliance is connected to Wi-Fi. wireless router manual. • LG ThinQ is not responsible for any network The appliance has been connection problems or any faults, disconnected. malfunctions, or errors caused by network Connecting the Appliance Initially connection.

  • Page 37: Smart Diagnosis Function

    LG ThinQ application. RF Radiation Exposure Statement This equipment • Launch the LG ThinQ application and select the complies with radiation exposure limit (<4.0 W/kg Smart Diagnosis feature in the menu. Follow for extremity (hand) exposure condition) set forth the instructions provided in the LG ThinQ for an uncontrolled environment.

  • Page 38: Maintenance

    MAINTENANCE MAINTENANCE Cleaning the Appliance battery from the product body and remove the foreign objects before resuming use of the appliance. Before Cleaning the Appliance • Check the inside of the product body, above the To maintain the optimum suction power, the Kompressor working plate, the extension pipe, cyclonic mesh filter, the exhaust filter and the pre- inlets, exhaust filter, pre-filter and cyclonic mesh...
  • Page 39 MAINTENANCE filter. Clean the dust bin and cyclonic mesh filter Remove the battery from the product body to avoid product damage. before cleaning the dust bin. • Do not force the Kompressor lever down if foreign objects are caught around the working plate of the Kompressor system.
  • Page 40 MAINTENANCE • Do not wash the product body or motor with the working plate with the towel-wrapped water. brush handle. Turn the product body over and lift the Kompressor lever up to clean the inside of Cleaning the Filters the working plate with the provided cleaning brush.
  • Page 41 MAINTENANCE button in order to separate it from the exhaust direct sunlight for at least 24 hours before filter. reassembling. Align the lock position of the exhaust filter cover with the letter "H" of the PUSH button on the exhaust filter. Lift out the pre-filter from the product body.

  • Page 42: Cleaning The Nozzles

    MAINTENANCE Insert the dried pre-filter and rotate the Turn the nozzle upside down and rotate the exhaust filter to the locked position cover lock slot counterclockwise. reassemble it on the product body. Pull the brush cover forward and pull the brush out.
  • Page 43 MAINTENANCE • Wrap the handle of the cleaning brush with Turn the nozzle upside down and remove the a wet towel or cloth and use it to clean the rotating brush while holding down the PUSH rotating brush and nozzle. button on the nozzle.
  • Page 44 MAINTENANCE • Do not wash the rotating brush and the Reassemble the small roller and the fixing part nozzle with water or immerse them in water. and make sure that they are properly attached. • Wrap the handle of the cleaning brush with a wet towel or cloth and use it to clean the rotating brush and nozzle.
  • Page 45 MAINTENANCE Cleaning the Pet Nozzle Insert the left side of the brush into the groove inside the nozzle. Press the nozzle release button to remove the nozzle from the extension pipe or product body. Press the cover of the brush to lock the brush until a clicking sound is heard.
  • Page 46 MAINTENANCE Cleaning the Steam Mop Nozzle WARNING • After steam cleaning, hot steam may become water droplets and hot water may flow from the inlet. After cooling the product sufficiently, clean the nozzle and store the product in the charging station.

  • Page 47: Troubleshooting

    TROUBLESHOOTING TROUBLESHOOTING Before Calling for Service Operation Symptoms Possible Cause & Solution The appliance does not Battery is fully discharged. operate. • Charge the battery. Appliance is turned off. • Press the Power button to turn on the appliance. Suction power is too Dust bin is full of dust.
  • Page 48 LG customer information centre for service. repeatedly. Foreign object is in the product body, extension pipe, inlet port or nozzle.
  • Page 49 TROUBLESHOOTING Symptoms Possible Cause & Solution One or both mop The motor protection function has been activated from overload and attachment plate does the mop attachment plate stopped rotating. not rotate. • There is a lot of friction and a load is applied to the steam mop nozzle when the steam mop is used as shown below conditions.
  • Page 50 TROUBLESHOOTING Symptoms Possible Cause & Solution Mop pads make the There is a lot of dust or liquid spilled on the floor. floor dirty. • Before cleaning in steam mode or normal mop mode, clean a place with a lot of dust using the suction function and wipe off any liquid. Otherwise, the dust may clump or the liquid may spread, causing the floor to become dirty.
  • Page 51 • If the steam mop nozzle malfunctions, the battery pocket LED will blink rapidly and the alarm will repeat. If occurs again even after powering the main unit off and on, stop using it and contact an LG customer information centre for service.
  • Page 52 TROUBLESHOOTING Symptoms Possible Cause & Solution Your home appliance The distance between the appliance and the router is too far. and smartphone are • If the distance between the appliance and the router is too far, the signal not connected to the may be weak and the connection may not be configured correctly.
  • Page 53 Memo...
  • Page 54 Memo...
  • Page 55 Memo...
  • Page 57 This will simplify installation and ensure that the product is installed correctly and safely. Leave these instructions near the product after installation for future reference. ENGLISH VDS-ST2** www.lg.com MFL71780946 Rev.00_050923 Copyright © 2023 LG Electronics Inc. All Rights Reserved.
  • Page 58 TABLE OF CONTENTS This manual may contain images or content that may be different from the model you purchased. This manual is subject to revision by the manufacturer. SAFETY INSTRUCTIONS READ ALL INSTRUCTIONS BEFORE USE............3 WARNING ......................3 CAUTION ......................9 INSTALLATION Product Overview.....................12 Installing the Charging Station ..............15 Storing the Accessories ...................17...

  • Page 59: Safety Instructions

    SAFETY INSTRUCTIONS SAFETY INSTRUCTIONS READ ALL INSTRUCTIONS BEFORE USE The following safety guidelines are intended to prevent unforeseen risks or damage from unsafe or incorrect operation of the appliance. The guidelines are separated into ‘WARNING’ and ‘CAUTION’ as described below. Safety Messages This symbol is displayed to indicate matters and operations that can cause risk.
  • Page 60 If the appliance is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, return it to an LG Electronics service centre. • Do not pull or carry by cord, use cord as a handle, close a door on cord, or pull cord around sharp edges or corners.
  • Page 61 SAFETY INSTRUCTIONS • Do not use a battery pack or appliance that is damaged or modified. Damaged or modified batteries may exhibit unpredictable behavior resulting in fire, explosion or risk of injury. • Do not disassemble, remove or short-circuit the battery. •...
  • Page 62 • When installing or moving the appliance, be careful not to pinch, crush, or damage the power cord or plug. Operation • This appliance is exclusively for use with the LG Electronics CordZero A9 Vacuum Cleaner. Do not use it for other appliances or other purposes.
  • Page 63 • Never attempt to operate this appliance if it is damaged, malfunctioning, partially disassembled, or has missing or broken parts, including a damaged cord or plug. Take it to an authorized LG Electronics service centre or dealer for assistance. • Do not apply excessive force to the power cord to bend it, or place it under a heavy object as this will damage it.
  • Page 64 • If the earth leakage breaker is tripped when the product is put on the charging station, immediately remove the appliance from the charging station. Contact an LG Electronics customer service centre. • Do not use or store a heating device or flammable substance (ether, benzene, alcohol, chemicals, combustible sprays, insecticide, air freshener or cosmetics) in close proximity to the appliance.

  • Page 65: Caution

    SAFETY INSTRUCTIONS • Never allow any water, beverage or detergent to get inside the battery. • Do not apply physical impacts to the battery. • Do not use the appliance without the dust bag and filters in place. Maintenance • Make sure to unplug the power cord when cleaning or maintaining the charging station.
  • Page 66 SAFETY INSTRUCTIONS • Do not carry the product with the Vacuum Cleaner, nozzles, or accessories inside; it may cause injury or product damage. • When opening and closing the product door or control panel, be careful not to get your fingers caught. •...
  • Page 67 SAFETY INSTRUCTIONS • Do not remove the battery during operation.

  • Page 68: Installation Product Overview

    INSTALLATION INSTALLATION Product Overview The images in this guide may be different from the actual components and accessories, which are subject to change by the manufacturer without prior notice for product improvement purposes. Front View Part Name Part Name Control Panel Motor Protection Filter (Expendable) Vacuum Cleaner Mounting Unit Exhaust Filter (Expendable)
  • Page 69 Wall Fixing Anchor Product Fixing Screw NOTE Dust Bag (Expendable) • The dust bag exhaust filter and the motor protection filter will eventually need to be Installation Kit replaced. Contact an LG Electronics customer service center. Specifications Appliance Model VDS-ST2** Dimensions...
  • Page 70 INSTALLATION NOTE • The number of batteries varies depending on the vacuum cleaner purchased. The spare battery is available to buy separately. Model EAC633822** or EAC637586** Capacity 2400 mA...

  • Page 71: Installing The Charging Station

    INSTALLATION Installing the Charging • When storing with the mop nozzle, install the product further away from the wall. Station Installation Follow the steps below to install the charging station on a hard and level floor. CAUTION 5 cm • Do not install on carpeted floors or rugs. The product may fall, causing injury or damage.
  • Page 72 INSTALLATION Drill a 4 mm wide and 44.5 mm deep hole at the WARNING selected position on the concrete wall and • Manage and supervise children or pet animals to insert the wall fixing anchor into the hole. Fix prevent them from bumping into product and the fixing rack to the wall firmly using the wall falling, or clinging to the product.

  • Page 73: Storing The Accessories

    INSTALLATION • Do not insert the fixing rack into the loop in the Hang the nozzle on the nozzle hook. middle. Doing so may cause the slide to slip after the product falls, resulting in personal injury or product damage. •...
  • Page 74 INSTALLATION Open the right door and insert the combination tool , the crevice tool and the cleaning brush for storage. NOTE • Before moving the product, unplug it and remove the vacuum cleaner, nozzles, and accessories. • To carry the product, open both doors and hold the areas shown.

  • Page 75: Operation

    OPERATION OPERATION Charging the Battery To insert, align the battery with the outline of the battery charger. Before Charging the Battery • Make sure that the adapter is connected to both the charging station and the power outlet. • Fully charging a single battery usually takes 4 hours.

  • Page 76: Getting Started

    OPERATION Getting Started Control Panel Features Control Panel List Descriptions Status Display The display shows the dust emptying operation status or when to replace the dust bag, charging status of the spare battery, working status of UVC LED and dust emptying mode. Start Press the Start/Stop button once to start the dust emptying operation.
  • Page 77 OPERATION List Descriptions UVC Mode Press the UVC Mode button once to start the UVC function. • UVC LED towards the dust bag turns on for 30 minutes when activated. - To suppress the growth of bacteria inside the dust bag, UVC LED automatically turns on for 2 hours every 12 hours without pressing the UVC Mode button.
  • Page 78 OPERATION List Descriptions Auto Emptying • Lights to indicate that the automatic dust emptying mode is on. Indicator - Automatic dust emptying mode automatically starts the operation every time the vacuum cleaner is mounted correctly onto the product. - If you remove the vacuum cleaner and mount it immediately, dust emptying operation may not start automatically, depending on the circumstance.
  • Page 79 OPERATION Using the Product Using the Auto Mode When the automatic dust emptying mode is set, Using the Manual Mode the dust emptying operation starts automatically whenever the vacuum cleaner is properly inserted into the product. Insert the vacuum cleaner into the product. •...
  • Page 80 OPERATION CAUTION • Once power is restored, product will reset and then product can be removed from emptying station. NOTE • The sound of the high-performance motor may be louder than the existing wireless vacuum cleaner. It is normal to hear sounds such as the vacuum cleaner, dust bin cover opening, product operating unit, and suction.

  • Page 81: Maintenance

    MAINTENANCE MAINTENANCE Cleaning the Appliance Changing the Dust Bag Cleaning the Product Body Open the left and right doors of the component storage. Disconnect the power plug from the outlet. Wipe the control panel using a soft cloth. • Product may malfunction if there is dust on the control panel.
  • Page 82 MAINTENANCE • To avoid odors, do not reuse the dust bags. Press button above the PUSH label with one hand. The dust bag is released. Place the end of the dust bag on the rail inside the product. Pull out the dust bag lever to remove the dust bag.
  • Page 83 • Replace the dust bag if it smells, even if it is not full. • The motor protection filter will eventually need to be replaced. Contact an LG Electronics customer service centre. Hold the product with one hand and take out Cleaning the Filters the motor protection filter with the other hand.
  • Page 84 MAINTENANCE To remove the exhaust filter, hold the bottom of the product and pull the handle end of the filter. Remove dust from the motor protection filter and exhaust filter once every 3 months and wash it using room temperature water. •...

  • Page 85: Troubleshooting

    Product setting The internal motor of the product is not operating properly . initialization doesn't • Disconnect the power plug from the outlet and contact an LG Electronics work even after the Service Centre. power plug is plugged in again.
  • Page 86 Two icons [dust The motor that holds the Vacuum Cleaner isn't working properly. emptying (replace bag) • Disconnect the power plug from the outlet and contact an LG Electronics and auxiliary battery] Service Centre. flash simultaneously.
  • Page 87 Memo...

This manual is also suitable for:

A9t-steam

Table of Contents