Zanussi ZPAC9002 Manual page 17

USING YOUR AIR CONDITIONER
COOL Mode, HEAT Mode, FAN Mode, DRY Mode
To correctly set these four modes using the remote control, follow
the same steps that are stated in the 'Operating from the control
panel' section of this manual but instead of pressing the buttons
mentioned on the control panel press the corresponding buttons on
the remote control.
Oscillating function
This function is useful for selecting the up and down flow of air
delivery.
To set this function correctly:
- Select the desired operating mode as detailed above.
- Press the OSCILLATING button and the deflector will begin to
swing.
Night Mode function
This function is useful for the night as it gradually reduces the
operation of the appliance.
To set this function correctly:
- Select the COOL or HEAT mode.
- Press the NIGHT MODE button.
The appliance will then operate in the previously selected mode.
When in this function the display screen will reduce in brightness and
the room will be maintained at the optimum temperature without
excessive fluctuations in temperature or humidity with silent
operation. The fan speed will always be low so you are not disturbed
by excessive noise while you sleep.
When in COOL mode, the selected temperature will increase by 1°C
(1°F) per hour over a 2-hour period. This new temperature will then
be maintained for the next 6 hours. After 6 hours the appliance will
turn itself off.
Page 17