Zanussi ZPAC9002 Manual page 22

DRAINING YOUR AIR CONDITIONER
2. Remove the drain plug. When removing the plug some residual
water may spill out, so ensure you have a pan to collect the
water.
3. Connect the supplied drain hose to the drain outlet.
4. The water can be continuously drained through the hose into a
floor drain or bucket.
5. Plug the unit back into the power source and turn it back on.
NOTE – Please ensure that the height of and the section of the drain
hose should not be higher than the drain outlet , or the water tank
may not be drained (Fig. 26 and 27).
Page 22