Disconnecting Product Manually From Network - Silvercrest SDWZ 1 A1 Operation And Safety Notes

˜ Disconnecting product
manually from network
B
2 ] [
Push metal pin into pin hole
[ 5 ]
green LED flashes quickly (fig . B) .
2 ] [
Complete renewed pairing process within 3
minutes after reset .
This function only resets the product to offline
mode and starts the pairing mode . If you
want to remove all data from the product and
the cloud, refer to the chapter "Additional
{Disconnect and wipe
functions",
16 GB/IE/NI/MT/CY
5 ] [
6x
5 s
9 ] [
for 5 s until
9 ] [
data} .