●
NFC module ZIF cable (13)
●
RTC battery cable (14)
●
Fingerprint reader ZIF cable (15)
9.
Remove the following screws that secure the system board and the I/O bracket to the computer:
●
Two Phillips M2.0 × 2.5 broad head screws (1)
●
Three Phillips M2.0 × 4.5 screws (2)
●
One Phillips M1.6 × 4.0 screw (3)
●
Four Phillips M2.0 × 4.5 screws (4)
10.
Remove the system board I/O bracket (5).
The system board I/O bracket is included in the Bracket Kit, spare part number N09030-001.
11.
Lift the left side of the system board (1) until it rests at an angle.
System board
59