Delete A Pin Code - Philips EasyKey 6000 Series User Manual

Press [*] twice, and enter the initial master
PIN code "12345678", then press [#] to
confirm.
After entering the master mode, enter
the new master PIN code (6-12 digits)
and press [#] to confirm, the indicator will
flash in green once with a voice prompt.
Enter the new master PIN code again
and press [#] to confirm. Once the
modification is done, the indicator will
flash in green twice with a voice prompt.
Modify master PIN code
Press [*] twice, and enter the master PIN
code, then press [#] to confirm.
1
Press [1] to modify the master PIN code.
The indicator will flash in green once after
[1] is pressed, indicating that the lock can
perform in settings.
Enter a new master PIN code (6-12 digits)
and press [#] to confirm. the indicator will
flash in green once with a voice prompt.
Enter the new master PIN code again
and press [#] to confirm. Once the
modification is done, the indicator will
flash in green twice with a voice prompt.
User settings
Press [*] twice, and enter the master PIN
code, then press [#] to confirm.
2
Press [2] to add a PIN code. The indicator
will flash in green once after [2] is pressed,
indicating that the lock can perform in
settings.
Enter a user PIN code (6-12 digits) and
press [#] to confirm, the indicator will
flash in green once with a voice prompt.
Enter the user PIN code again and press
[#] to confirm. Once the adding is done,
the indicator will flash in green twice with
a voice prompt.

Delete a PIN code

Press [*] twice, and enter the master PIN
code, then press [#] to confirm.
3
Press [3] to delete a PIN code. The
indicator will flash in green once after [3]
is pressed, indicating that the lock can
perform in settings.
Enter the PIN code that needs to be
deleted and press [#] to confirm.
After the deletion, the indicator will flash
in green twice with a voice prompt.
11