Table of Contents
Advertisement
Add a PIN code (optional)
Press [*] twice, and enter the master PIN
code, then press [#] to confirm.
5
Press [5] to add a fingerprint. The
indicator will flash in green once after [5]
is pressed, indicating that the lock can
perform in settings.
Place your finger on the fingerprint
sensor, and after you hear a "beep" take
your finger off and put it back again,
repeat the action 8 times to finish
fingerprint enrollment.
After adding the fingerprint, the indicator
will flash in green twice with a voice
prompt.
Attention
The fingerprint is an optional feature, if the
product you purchased has a fingerprint
unlock function, please follow this step
to enroll user fingerprints; if there is no
fingerprint unlock function, please skip this
step.
Delete a PIN code (optional)
Press [*] twice, and enter the master PIN
code, then press [#] to confirm.
6
Press [6] to delete a fingerprint. The
indicator will flash in green once after [6]
is pressed, indicating that the lock can
perform in settings.
12
Place your finger on the fingerprint
sensor until you hear a voice prompt,
when the indicator flashes in green
twice, indicating the deletion is done.
Attention
The fingerprint is an optional feature, if the
product you purchased has a fingerprint
unlock function, please follow this step
to enroll user fingerprints; if there is no
fingerprint unlock function, please skip this
step.
Press [*] twice, and enter the master PIN
code, then press [#] to confirm.
Press [7] to add a key tag. The indicator
will flash in green once after [7] is pressed,
indicating that the lock can perform in
settings.
Place the key tag on the card reader until
you hear a beep, when the indicator
flashes in green twice, indicating the
enrollment is done.
Press [*] twice, and enter the master PIN
code, then press [#] to confirm.
Advertisement
Table of Contents
