Table of Contents
Advertisement
Step 2: Install gstreamer packages
sudo apt-get -y install libgstreamer-plugins-base1.0-dev
gstreamer1.0-plugins-base gstreamer1.0-plugins-good
libgstreamer-plugins-good1.0-dev gstreamer1.0-plugins-bad-apps
gstreamer1.0-plugins-bad libgstreamer-plugins-bad1.0-0
gstreamer1.0-plugins-ugly
3.3.5
IPU User-Space Libraries
3.3.5.1 Manual Build
These are the prerequisite packages needed before building IPU RPM packages:
sudo apt-get -y install cmake build-essential pkg-config
libexpat1-dev rpm autoconf libtool
Build ipu6-camera-bins
git clone
git checkout
cd ipu6ep
sudo cp -rf lib/* /usr/lib
sudo cp -rf include/* /usr/include/
sudo cp -rf lib/firmware/intel/ipu6ep_fw.bin
/lib/firmware/intel/
Build ipu6-camera-hal
https://github.com/intel/ipu6-camera-hal.git
git clone
git checkout
cd ipu6-camera-hal
mkdir build & cd build
cmake -DCMAKE_BUILD_TYPE=Release -DIPU_VER=ipu6ep
-DUSE_PG_LITE_PIPE=ON -DCMAKE_INSTALL_PREFIX=/usr ../
make -j8
make package
sudo rpm -ivh --force --nodeps libcamhal-0.x.x-Linux.rpm
Chapter 3 – Hardware & Software Installation Guide
https://github.com/intel/ipu6-camera-bins.git
rpl-pv-v2
rpl-pv-v2
26
Advertisement
Table of Contents
