Table of Contents
Advertisement
[DESIGN PRECAUTIONS]
Do not bundle the control and communication cables with main-circuit, power
or other wiring.
Run the above cables separately from such wiring and keep them a minimum
of 100mm (3.94in.) apart. Not doing so noise can cause a malfunction.
[MOUNTING PRECAUTIONS]
Be sure to shut off all phases of the external power supply used by the system
before mounting or removing this unit onto/from the GOT.
Not doing so can cause the unit to fail or malfunction.
Use this unit in the environment that satisfies the general specifications
described in User's Manual.
Not doing so can cause an electric shock, fire, malfunction or product damage
or deterioration.
Tighten the mounting screws within the specified torque range.
Undertightening can cause the GOT to drop, short circuit or malfunction.
Overtightening can cause a drop, short circuit or malfunction due to the
damage of the screws or the GOT.
Do not touch the conductive and electronic parts of the unit directly.
Doing so can cause a unit malfunction or failure.
CAUTION
DANGER
CAUTION
A-2
Advertisement
Table of Contents
