D-Link DIR-878 Quick Installation Manual page 37

DIR-878
Wireless Module Parameters
Wireless connection rate
Transmitter output power
The maximum value of the
transmitter output
depends upon
frequency regulations applied in
your country
2 Maximum wireless signal rate is derived from IEEE standard 802.11ac and 802.11n specifications. In order
to get the rate of 600Mbps in the 2.4GHz band, a Wi-Fi client should support MIMO 3x3 and QAM256
modulation scheme. Actual data throughput will vary. Network conditions and environmental factors,
including volume of network traffic, building materials and construction, and network overhead, lower
actual data throughput rate. Environmental factors will adversely affect wireless signal range.
·
2
·
·
·
·
·
·
·
power
the radio
·
·
·
IEEE 802.11a: 6, 9, 12, 18, 24, 36, 48, and 54Mbps
IEEE 802.11b: 1, 2, 5.5, and 11Mbps
IEEE 802.11g: 6, 9, 12, 18, 24, 36, 48, and 54Mbps
IEEE 802.11n (2.4GHz): 6,5–450Mbps (MCS0–MCS23)
to 600Mbps (QAM256)
IEEE 802.11n (5GHz): from 6,5 to 450Mbps (from MCS0
to MCS23)
IEEE 802.11ac (5GHz): from 6,5 to 1300Mbps (from
MCS0 to MSC9)
802.11a (typical at room temperature 25 °C)
15dBm at 6, 54Mbps
802.11b (typical at room temperature 25 °C)
15dBm at 1, 11Mbps
802.11g (typical at room temperature 25 °C)
15dBm at 6, 54Mbps
802.11n (typical at room temperature 25 °C)
2.4GHz
15dBm at MCS0, 7
5GHz
15dBm at MCS0, 7
802.11ac (typical at room temperature 25 °C)
15dBm at MCS0, 9
Quick Installation Guide
37