Converting From Vacuum To Blower - Toro UltraPlus 51681 Operator's Manual

3. Install the vacuum bag.
4. Adjust the bag strap as needed for comfortable operation.
3
Converting from Vacuum to
Blower
Parts needed for this procedure:
1 Blower tube
1 Inlet cover
Procedure
1. Remove the vacuum bag and the vacuum tube.
g027315
2. Install the blower tube and the bottom inlet cover.
Important:
bottom inlet cover locked in place.
Note:
If the motor runs without the bottom inlet cover in
place, do not use the appliance. Return it to an Authorized
Service Dealer.
5
The motor should not run without the
g027309
g027310