Related Manuals for Beko B5DT59442W
Summary of Contents for Beko B5DT59442W
- Page 1 Washer dryer combination User manual B5DT59442W 2820530526/ NL/ / 13-10-2022 15:03...
-
Page 2: Table Of Contents
6.1 Control panel ........Table of contents 6.2 Symbols on the screen ..... 1 Safety instructions ....6.3 Preparing the machine ..1.1 Intended use ........6.4 Selecting the washing program ..1.2 Safety of children, vulnerable 6.5 Washing programs......persons and pets ..... - Page 3 Read this manual first! Dear Customer, Thank you very much for choosing itBekoproduct. We hope that you get the best results from your product, which has been manufactured with high-quality and modern technology. For this reason, we ask that you read this entire manual and all other accompanying documents carefully before using the product.
-
Page 4: Safety Instructions
1 Safety instructions This chapter contains the purposes and should not be necessary safety instructions to used for any purpose other than avoid the risk of personal injury its intended use. or material damage. Our • Use only for washing and drying textile products company cannot be held liable marked accordingly. -
Page 5: Electrical Safety
reduced physical, sensory and • Keep the packaging material mental capabilities or lack of away from children. Risk of experience and knowledge if injury and suffocation. they have been given supervision or instruction • Keep all solvents and additives concerning the safe use of the used with the product out of appliance and the risks the reach of children. -
Page 6: Safety When Moving The Product
on the power cord. Do not • This is a heavy product, you bend, crush or bring the should not move it yourself. power cord into contact with Do not hold protruding parts, heat sources. such as the door, to lift and •... - Page 7 call to take the necessary performed by an expert steps. These operations are electrician. Do not operate the the responsibility of the product without proper customer. grounding in accordance with • Inspect the product for regional / national regulations. damage before installing. Do •...
-
Page 8: Safety During Operation
1.6 Safety during • Place the end of the water drain hose in the waste water operation drain pipe, sink or bathtub. • When using appliances, only use solvents, softeners and • Place the power cord and cables additives that are suitable for in such a way that there is no washing machines. -
Page 9: Drying Safely
operation. Contact of the with your skin, for example when detergent with your skin or the drain hose is connected to eyes can be dangerous. the tap. Do not touch the waste • Make sure that no pets climb water. into the product. - Page 10 • Laundry soiled with material • The door becomes very hot after such as vegetables or mineral the drying process. At the end of oil, acetone, alcohol, petrol, drying, you must open the door gas oil, spot removers, of the appliance completely. Do naphtha, turpentine, paraffin not touch the metal door in the or paraffin removers should be...
- Page 11 • An ambient temperature of to dry, you must enable a 15°C to +25°C is ideal for short wash program every 15 the product. cycles. • Do not overload the machine • Before putting laundry in the during drying. You must machine, check everything respect the maximum load and make sure that there are...
-
Page 12: Safety During Maintenance And Cleaning
woolen clothes shrink and household cleaning other delicate clothes can be products, solvents, gas, damaged. gasoline, thinner, alcohol, • Check the symbols on the varnish, etc. during cleaning clothing label before washing and drying. • Solvent cleaners can release • The machine automatically toxic fumes, eg detergent. -
Page 13: Packing Information
of electrical and electronic equipment. Consult your local authorities for more information about these collection centers. RoHS compliance: The product you have purchased is compliant with the European RoHS Directive (2011/65/ EU). It does not contain any harmful and prohibited material as specified in the directive. -
Page 14: Technical Specifications
3 Technical specifications Beko Supplier's name or trademark: B5DT59442W Name of the model 7178552500 Washing capacity (cotton) (kg) Drying capacity (cotton) (kg) 1400 Maximum spin speed (cycle/min) built-in Height (cm) Width (cm) Depth (cm) Single / Double water inlet + / -... -
Page 15: Installation
4 Installation • Before installation, visually check whether First read the chapter “Safety the product has any defects. Do not instructions”! install the device if it is damaged. Damaged products can pose risks to your Your washing machine safety. automatically detects the amount of laundry placed in the machine 4.1 Suitable installation location when a program is selected. -
Page 16: Removing The Transport Protection Bolts
Lid A 2. Bend the internal part by pressing it at the gripping zones and pull out the part. 3. Fit the plastic covers that come in the bag with the manual into the holes on the rear panel. Tilt the machine slightly backwards. Let the tabs of cover A rest against the WARNING! bottom panel. -
Page 17: Connecting The Drain Hose To The
4.5 Connecting the drain hose to the WARNING! Single water supply models should drain not be connected to the hot water 1. Attach the end of the drain hose directly tap. In this case, the laundry will be to the drain hose, sink or bathtub. damaged or the product will switch to protection mode and will not work. -
Page 18: Adjusting The Legs
be held responsible for damage caused if between the drain and the product. If not, the product is used without grounding in you may experience problems with water accordance with local regulations. drainage. 6. If the hose is too short, use it by adding •... -
Page 19: Preliminary Preparation
Never carry the product if the transport bolts are not correctly attached! Your product is so heavy that it cannot be carried by one person. Your product should be carried by two people and particular care should be taken on stairs as it is a heavy product. -
Page 20: Tips For Saving Energy And Water
machine is installed. Such dust and powder on the laundry can accumulate on the inner parts of the machine over time and cause damage. • Before washing Angora wool laundry, place it in the freezer compartment of the refrigerator for several hours. This reduces frizz Use an anti-scale agent suitable for washing machines... -
Page 21: Using Detergent And Fabric Softener
5.7 Using detergent and fabric Follow the instructions in the softener "Programme and consumption table". If the machine is overloaded, the washing performance of the machine WARNING! will decrease. In addition, noise and Read the manufacturer's vibration problems may arise. For a instructions on the packaging when successful drying performance, do using detergents, fabric softeners,... - Page 22 • You may exceed the recommended • Do not select a program with prewash if you dosage values stated on the packaging use a detergent bag or detergent ball. Place to avoid problems with excessive foam the detergent sachet or bulb directly and poor rinsing, to save money and to between the laundry in the product.
-
Page 23: Tips For Efficient Washing
Using gel and tablet detergents The use of an anti-limescale agent • If necessary, you may only use anti-scale agent made for washing machines. • If the detergent is liquid and there is no liquid detergent drawer in your product, Use bleach and decolorizers you must place the gel detergent in the •... - Page 24 It may be necessary to Washing powder and liquid pre-treat the stains or detergents recommended carry out a pre-wash. Colored laundry Give preference detergents can be used liquid detergent to liquid at recommended doses parts suitable for detergents that Washing powder and liquid become special for heavily soiled laundry colored wash and...
-
Page 25: Tips For Efficient Drying
5.9 Tips for efficient drying Programs Synthetic Wash and dry Wash and wear cotton drying) Babyprotect+ gene gene to dry It was and It was and Clothes like bed sheets, dries after dries after shirts, t- bedding, shirts, sweat card! bed drawer card! bed drawer kens, bed- kens, bed-... -
Page 26: How To Operate The Product
sing. After the program starts, the actual load, the washing program will be load is detected by the machine within adjusted accordingly and the program 20-25 minutes. If the detected charge is duration will be automatically increased. higher than half You can follow this change on the screen. -
Page 27: Symbols On The Screen
6.2 Symbols on the screen 17 16 15 13 12 11 Spin speed indicator Temperature indicator Symbol 'door lock enabled' Duration information Program progress indicator No water indicator Add clothes indicator Bluetooth connection indicator Remote control indicator Delayed start enabled indicator Drying level indicator Symbol 'child lock activated' Auxiliary function button... -
Page 28: Preparing The Machine
you can set your machine to switch to the The images used to describe the drying step (automatic or with timer) at the machine in this section are end of the wash cycle, without pauses/ schematic and may not match the interruptions. -
Page 29: Synthetic 40 4
gram in accordance with EU • Wool environmentally friendly design and Use it to wash your delicates and woollens. energy labeling regulations. Select the correct temperature that Although this program was longer than other corresponds to the clothing label. The programs, it is more efficient in terms of laundry is washed with very slow washing energy and water consumption. -
Page 30: Temperature Selection
** It is recommended that you run the It ensures that your garments are cycle with no more than 6 shirts to washed gently thanks to special rotating minimize creasing in your shirts. If you movements. wash more than 6 shirts, there may be •... -
Page 31: Spin Speed Selection
The Temperature adjustment knob The Spin speed adjustment knob only works backwards. For only works backwards. For example, example, if you want to select 60°C, if you want to select 1000 rpm, while 40°C is displayed on the while 800 rpm (cycles/min) is shown screen, you must press the button on the screen, you must press the several times until you reach 60°C... -
Page 32: Drying Programs
In programs that do not have a Refer to the Correct load capacity drying setting, when the drying for the dry weight of the laundry. secondary function button is pressed, the drying light does not • Cotton cupboard dry change and a warning sounds. For Use this program to dry cotton laundry drying programs only, you must set with a dry weight up to 6kg. -
Page 33: Program And Consumption Table
• • Wash & Dry Express HygieneTherapy Use this program to wash 0.5 kg of laundry Hygienic washing with warm air (2 shirts) in 40 minutes or 1 kg of laundry (5 (program duration 58 min.) shirts) in 60 minutes. The hygienic ventilation program ensures that the temperature of the laundry is kept at relatively high temperatures with an... - Page 34 1400 • 0.938 40-60 * * * 46.5 1400 • Eco 40-60 0.706 40-60 * * * 1400 • 0.372 40-60 * * * 1400 • 3,695 40-60 * * * Eco 40-60 + cupboard dry) 1400 • 2,095 40-60 * * * 1.60 1200...
- Page 35 Read the Installation section of the When you select a program you can manual before using the machine see the washing time on the for the first time. The auxiliary machine's display. Depending on functions in the table may differ the amount of laundry you have depending on the model of your loaded into your machine, there...
-
Page 36: Selection Of Auxiliary Functions
Wash & Dry 3.80 1400 • • • • • 90-30 BabyProtect+ 6.00 1400 • • • • • Wash & Dry 6+6 kg 60-Cold 0.60 1200 • • Wash & Dry Express 30-Cold 1.00 1200 • • Wash & Dry Express 30-Cold 0.50 •... -
Page 37: Auxiliary Functions
When an auxiliary function button If the selected humidity level (Iron that cannot be selected with the Dry, Cupboard Dry, Extra Cupboard current program is pressed, the Dry) cannot be reached at the end washing machine gives an audible of the drying programme, the warning. -
Page 38: Selected Functions/Programs
anti-scale agent (drum cleaning material) • Remote control suitable for washing machines in You can use this auxiliary function key to compartment “2”. At the end of the drum connect your product to smart devices. See cleaning, this program performs a drying the HomeWhiz and the Remote Control step to dry the inside of the drum. -
Page 39: Drying Steps
* Your laundry may be warmer at the end To activate a bluetooth connection: of the wash cycle if the steam function has been applied at the end of the programme. Press and hold the remote control function This is normally the operational conditions for three seconds. -
Page 40: End Time
The program duration may vary Extra Dry from the values in the Drying is carried out until the Iron Dry "Programme and Consumption step is reached in the drying level. Table", depending on water pressure, water hardness and temperature, ambient temperature, The dryness level may vary amount and type of laundry, according to the combination and... -
Page 41: Starting The Program
3. Set the desired end time by pressing the 6.15 Cargo Door Lock End Time button. End time indicator The loading door of the machine has a lights up. locking system that prevents the door 4. Press Start/Pause. Time countdown from opening if the water level is not begins. -
Page 42: Changing The Selections After The
3. Pull the emergency handle of the loading door with a tool and release. Then open the loading door. 4. If the loading door does not open, repeat the previous step. If the water temperature in the machine exceeds 50 °C, you cannot deactivate the door lock for safety reasons, even if the water level is suitable. -
Page 43: Canceling The Program
gramme time, this display will be turned off The loading door will not open if the completely. When you turn the program water temperature in the machine is selection knob or touch a button, the lights high or the water level is higher than light up and the screen switches on again. -
Page 44: Homewhiz Setup
2. To start the configuration, your machine To use the HomeWhiz function, the must be switched off. Press and hold app must be installed on your smart the temperature button and remote device and your washing machine control function button at the same must be connected to your home time for 3 seconds to put your machine network via bluetooth. -
Page 45: Setting Up A Washing Machine That
Your washing machine will automatically switch off if you cannot perform the configuration within 5 minutes. In this case, you have to start the configuration process all over again. If the problem persists, contact the authorized service. You can use your washing machine The HomeWhiz app may require with more than one smart device. -
Page 46: The Remote Control Function And
6.20.3 The remote control function If you want to operate your washing machine remotely, after closing the front and use lid, activate the remote control function by At the end of the HomeWhiz configuration, pressing the remote control button while bluetooth switches on automatically. -
Page 47: Troubleshooting
• When the program knob is turned and 1. Check that your smart device is connected another program is selected or the to the relevant home network. appliance is switched off. 2. Restart the product application. 3. Disable and then enable bluetooth from 6.20.4 Troubleshooting the user's control panel. -
Page 48: Cleaning The Product And The Control Panel
Foreign metal substances cause rust stains with an appropriate brush. If the filters in the drum. Clean the stains on the drum are too dirty, remove them with pliers surface with stainless steel cleaners. and clean them in this way. 3. -
Page 49: Troubleshooting
To clean the dirty filter and drain the water: If the product does not have an emergency water drain hose, to drain the water you must: 1. Unplug the product from the wall outlet to disconnect the power supply. The temperature of the water in the product can reach up to 90 ºC. - Page 50 There is water in the product. The product stopped shortly after the program started. • There may be some water left in the product due to quality control processes • The machine has temporarily stopped during production. >>> This is not an due to low voltage.
- Page 51 • Voltage is low. >>> Washing time is Product does not switch to the spin extended to avoid poor washing results phase. (*) due to low voltage supply. • The charge in the product is not evenly distributed. >>> The automatic •...
- Page 52 • Loaded too much laundry. >>> Do not detergent for the washing machine and overload the product. Load with your laundry. Keep detergent sealed in a quantities recommended in the moisture-free area and do not expose it "Programme and consumption table". to extreme temperatures.
- Page 53 • Detergent was stored under improper • Detergent is mixed with fabric softener. conditions. >>> Store detergent in a >>> Do not mix fabric softener with closed and dry place. Do not keep it in detergent. Wash and clean the drawer excessively hot places.
-
Page 54: Disclaimer / Warning
The laundry comes out wet after the The machine does not dry. drying step. • The laundry may not have been dried, or • The selected program may not be the drying step may not have been suitable for the type of laundry. enabled. - Page 55 "Self-Repair" section below, repairs self-repair manual or available in must be performed by registered support.beko.com not adhered to may professional technicians to avoid safety result in security issues that cannot be issues. A Registered Professional Mechanic attributed tosupport.beko.comand these...