File Playback; Selecting Files - JVC KA-DV5000 Startup Manual

The following trigger modes are supported:
TRIG – In this mode, you can record to the cameras DV tape and the PC (running Streamproducer)
•
simultaneously, and both recordings are controlled by the camera's REC buttons. In this mode, it is
necessary to have a recordable tape in the camera.
The "NO TAPE" warning appears on the camera's
viewfinder/LCD screen if no tape loaded.
To start recording to the tape and to the PC disk drive
simultaneously, push the [REC START/STOP] button on
the camera. In addition to the 'REC' indicator in the
viewfinder or LCD screen, The e sign turns red on the
display of camera indicating that you are recording to tape
and PC. The 'Capture' button in the Streamproducer
window associated with the camera will highlight when
capturing video.
To stop recording, push the [REC START/STOP] button on the
camera again. The 'REC' indication will change to 'STBY' and the
red e will revert to yellow on the camcorder display.
SPLIT – In this mode, you can record on the DV tape and/or the PC (running Streamproducer)
•
independently. It is not necessary to have a recordable tape in the camera.
To record to DV tape, use the [REC START/STOP]
button on the camera as you normally would. When
recording to tape, the 'REC' indicator will be shown in the
viewfinder/LCD display.
To capture the video on the PC, push the [SELECT] dial
on the camcorder. The e sign turns red on the display of
camera indicating that you are recording to the PC. The
'Capture' button in the Streamproducer
associated with the camera will highlight when capturing
video.
To stop capturing the video, push the [SELECT] dial on the camera
again. The red e will revert to yellow on the camcorder display, and
the 'Capture' button on Streamproducer screen will revert to
normal.
OFF – Trigger mode is disabled, and the camera and Streamproducer work independently, the camera
•
record button controls recording to tape, and the Streamproducer 'Capture' button controls stream
capture.
* This figure shows a GY-DV300U.
For details of other models, please
see your Users Guide.
window
* This figure shows a GY-DV300U.
For details of other models, please
see your Users Guide.
14

4.3 File Playback

Streamproducer can playback video clips saved on the hard disk or CompactFlash (CF) memory card, up to
four files simultaneously, each is shown on its own video display window. In addition, you can cast (stream)
from any one of these files, and even switch between them.
4.3.1

Selecting files

To open a file in any view window not already allocated (No setting is shown in title bar).
Click the [File] button on the video display window to open a file. The 'Open a stream file' dialog
•
appears.
Select a file and click [Open] button. You can also open a file by using the [Open file] option from the
•
[Menu] pull-down. You can open any valid .asf file. Use the standard windows pull-down items to locate
the desired file.
When the file is selected, the file name and image size are shown above the video display window as
•
are the operation buttons.
File name and
image size
You can see additional information about the selected file by choosing [Property...] from the [Menu]
•
pull-down.
Operation buttons
15