Table of Contents
Advertisement
,
Note
y When using Bluetooth® technology, you
have to make a connection between the
unit and the bluetooth device as close as
possible and keep the distance.
However it may not work well in the case
below :
- There is a obstacle between the unit and
the bluetooth device.
- There is a device using same frequency
with Bluetooth® technology such as a
medical equipment, a microwave or a
wireless LAN device.
y This unit supports Bluetooth auto pairing.
However it does not operate in the case
below:
- When you restart this unit.
- When you disconnect this unit by yourself.
- When you disconnect this unit on the
connected Bluetooth device.
y The sound may be interrupted when the
connection is interfered with by the some
other electronic wave.
y You cannot control the Bluetooth device
with this unit.
y Pairing is limited to "One" Bluetooth® device.
Multi-Pairing is not supported.
y Depending on the type of the device,
you may not be able to use the Bluetooth
function.
y You can enjoy using Bluetooth® when using
Phone, MP3, Notebook, etc..
y The more distance between the unit and
the bluetooth device, the lower the sound
quality becomes.
y The Bluetooth® connection will be
disconnected when the unit is turned off or
the Bluetooth® device gets too far from the
unit.
y If the Bluetooth® connection is
disconnected, connect the Bluetooth®
device again.
y When a Bluetooth® device is not connected,
"BT READY" appears on the display window.
Other operations
DRC (Dynamic Range Control)
Make the sound clear when the volume is turned
down (Dolby Digital only). Set to [DRC ON] by using
DRC.
AV Sync
When receiving audio signals from TV, sound and
images may not be matched. In the case, this
function can adjust the delay time.
1. Press AV SYNC.
2. Use C/V to control the time which you
can set at between 0 and 300 ms.
Using your TV remote control
You can control some functions of this unit by
your TV remote control even by other company's
product.
Controllable functions are volume up/down and
mute.
Press and hold INFO on the remote control for
about 3 seconds. "ON - TV REMOTE" appears and
you can control this unit by your TV remote control.
To check the status of this function, press and hold
INFO.
To turn off this function, press and hold INFO
and press it once again while "ON - TV REMOTE" is
scrolled.
,
Note
y Supported TV brands
LG
Panasonic
Sharp
Sony
y Make sure that the sound output of your TV
is set to [External speaker].
y Depending on the remote control, this
function may not work well.
y This function may not work well when some
TV control functions such as HDMI CEC,
SIMPLINK and LG Sound Sync set to ON.
Operating
57
Philips
Samsung
Toshiba
Vizio
3
Advertisement
Table of Contents
